Rancang Bangun Mesin Extruder Filamen 3D Printing
DOI:
https://doi.org/10.33504/jitt.v3i1.262Keywords:
Plastic, Extruder, Screw, Nozzel, FilamentAbstract
The 3D printer filament extruder is a machine used to melt and extrude filament for 3D printing processes. Thermoplastics are one type of plastic commonly used in filament production due to their durability, strength, and easy to shape, making them a preferred material for filament manufacturing. Filament is produced through an extrusion process using a machine equipped with a high-temperature heating system to shape the filament. The aim of this research is to design, construct, and test a 3D printing filament extruder to produce filament. This research produces a 3d printing filament extruder machine with a vertical position that uses a DC motor as a driving mechanism, while chains and sprockets are used to reduce rotation and increase rotational torque. Based on the results of the trials conducted, the barrel temperature of 250°C and the screw rotation speed of 5 RPM which produces a filament diameter that is close to the standard for filament use with an average filament diameter of 1.97 mm.
Downloads
References
N. BagasAdhiatma, Rancang Bangun 3D Printer. Semarang, 2022.
R. Mahfud, Y. Setyoadi, and A. Burhanudin, “Rancang Bangun Mesin Filament Extruder Yang Berbasis Ardiuno Mega2560 Dengan Metode Penarik Dan Penggulung Otomatis,” Sci. Eng. Natl., vol. 5, no. Desember, pp. 544–553, 2020, [Online]. Available: http://conference.upgris.ac.id/index.php/sens/article/view/1526
M. Rasid, S. Suparjo, D. Tafrant, O. F. Homzah, and S. Ma’arif, “Analisa Pengaruh Kemiringan Sudut Screw Extruder Pada Proses Pembuatan Filament 3D Printer Pada Mesin Ekstrusi Single Screw,” Austenit, vol. 14, no. 1, pp. 54–60, 2022, doi: 10.53893/austenit.v14i1.4445.
H. Tondi, “Rancang Bangun Mesin Ekstruder Filamen 3D Printer,” Skripsi Tek. Mesin, Fak. Teknol. Ind. Univ. Islam Indones., pp. 1–66, 2019, [Online]. Available: https://dspace.uii.ac.id/bitstream/handle/123456789/14157/Skripsi 14525044.pdf?sequence=1&isAllowed=y
B. wijayanto Atmoko, “29. Pengembangan Mesin Ekstruder Single Screw Untuk Mendaur Ulang Limbah 3D Printing Pengembangan Mesin Ekstruder Single Screw,” pp. 1–35, 2022.
N. P. Parahdiba, I. Abdullah, and D. F. F. Roji, “Rancang Bangun Mesin Ektrusi Pembuat Filamen,” 2021.
A. T. Prakoso, S. Davin, N. Y. Mahendra, M. A. A. Saputra, and H. Basri, “Pemanfaatan Limbah Plastik Dalam Pembuatan Filamen 3D Printer Menggunakan Mesin Ekstrusi Pada Lab Konversi Energi Universitas Sriwijaya,” J. Pelita Sriwij., vol. 1, no. 2, pp. 043–052, 2022, doi: 10.51630/jps.v1i2.69.
E. M. Hasiri, L. Raufun, and L. M. I. Kalbi, “Impelementasi Extruder Geetech Mk8 Pada Prototype Printer 3D Menggunakan Arduino Dan Ramps 1.4 Control Boards Implementation Of Geeetech Mk8 Extruder On 3D Printer Prototype Using Arduino And Ramps 1.4 Control Boards,” J. Inform., vol. 11, no. 1, 2022, [Online]. Available: http://ejournal.unidayan.ac.id/index.php/JIU
I. Sujana and R. A. Wicaksono, “Rancang Bangun Alat Ekstruder Dengan Pemanfaatan Limbah Plastik Polypropylene Dan Polyethylene Terephthalate Untuk Menghasilkan Filamen 3D Printing,” J. Teknol. Rekayasa Tek. Mesin, vol. 3, no. 1, pp. 20–26, 2022.
A. Djafar and M. A. Fatoni, “Perancangan Mesin Single Screw Extruder Untuk Daur Ulang Plastik Ldpe Menjadi Filament Feed 3D Printing,” J. Ilm. Teknol. dan Rekayasa, vol. 26, no. 3, pp. 205–217, 2021, doi: 10.35760/tr.2021.v26i3.4416.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
