Analisis Pengaruh Temperatur Suhu dan Kecepatan Putar Screw Terhadap Hasil Filament 3D Printing Pada Mesin Filament Extruder Menggunakan Metode Taguchi
DOI:
https://doi.org/10.33504/jitt.v3i2.237Keywords:
3D, Printing, Filament, Extruder, Taguchi MethodAbstract
The development of 3D printing technology has opened up great opportunities in various industries, especially in the manufacture of complex three-dimensional objects. However, the quality of the print results is greatly influenced by the physical and mechanical properties of the filament used. The filament production process, especially in filament extruder machines, requires extra attention to operational parameters such as extrusion temperature and screw rotation speed. Variations in these parameters significantly affect filament quality, such as tensile strength and thickness, which can decrease if not properly adjusted. This study aims to analyze the effect of extrusion temperature and screw rotation speed parameters on filament quality, and to determine the optimal settings using the Taguchi method. The results showed that screw rotation speed is the most significant faktor in determining filament diameter with a contribution of 73%. In addition, extrusion temperature contributes 17.6%. Through optimization using the Taguchi method, it is known that the optimal extrusion temperature is 250°C with a screw rotation speed of 5 RPM, producing filament with a diameter of 1.8 mm.
Downloads
References
A. Ramadhan and A. Ramadhan, “Komparasi Material Filamen 3D Printer Terhadap Hasil Kualitas Cetak Produk Mainan Eggball Submarine,” Jurnal Rekavasi, vol. 12, no. 1, pp. 23–34, 2024, doi: 10.34151/rekavasi.v12i1.4716.
T. P. Soejatmiko, “Perancangan Mesin Penggulung Filament Extruder 3D Printing,” 2023.
M. Validasi et al., “Investigasi Pengaruh Sifat Tarik Saat Bervariasi Pengaturan Cetak Bagian Asam Polilaktat Cetak 3D : Numerik,” pp. 1–19, 2024.
G. Atakok, M. K. B, and H. B. K. C, “Artikel Asli Kekuatan tarik , tekukan tiga titik , dan kekuatan tumbukan komponen cetakan 3D menggunakan PLA dan filamen PLA daur ulang : Investigasi statistik,” pp. 1542–1554, 2022.
M. Edoward Ramadhan, M. Darsin, S. Ilham Akbar, and dan Danang Yudistiro, “Akurasi Dimensi Produk Filamen 3D Printing Berbahan Polipropilen Menggunakan Mesin Ekstrusi Dimensional Accuracy of 3D Printed Polypropylene Filament Using Extrusion Machine,” Jurnal Tekno Sains, vol. 11, no. 02, pp. 162–173, 2022.
S. Luthfianto, T. Hidayat, M. F. Nurwildani, M. C. Sugiono, and M. Agus, “Perancangan Mesin Extruder Filamen 3D Printing Dengan,” pp. 1–7, 2023.
R. A. Tya, Y. S. Adi, and A. Burhanuddin, “Rancang Bangun Mesin Filament Extruder Yang Berbasis Arduino Mega2560 Dengan Hasil Acrylonitrile Butadiene Styrene (Abs),” Science and Engineering …, vol. 5, no. Sens 5, pp. 495–506, 2020, [Online]. Available: http://conference.upgris.ac.id/index.php/sens/article/view/1526
D. Iskandar, A. S. Sunarya, and G. Ananto, “Rancang Bangun Filament Extruder Machine Dengan Pemanfaatan Limbah Plastik Jenis Low Density Polyethylene Sebagai Bahan Baku 3D Printer,” Politeknik Manufaktur Bandung, 2019.
M. A. A. Mamun and M. Hasanuzzaman, “Optimasi Parameter Proses Ekstrusi Filament 3D Printing Dengan Metode Taguchi,” Energy for Sustainable Development: Demand, Supply, Conversion and Management, pp. 1–14, 2020.
H. A. Pamasaria, T. H. Saputra, A. S. Hutama, and C. Budiyantoro, “Optimasi Keakuratan Dimensi Produk Cetak 3D Printing berbahan Plastik PP Daur Ulang dengan Menggunakan Metode Taguchi,” JMPM (Jurnal Material dan Proses Manufaktur), vol. 4, no. 1, pp. 12–19, 2020, doi: 10.18196/jmpm.4148.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
