Pengaruh Variasi Fraksi Volume Komposit Berpenguat Serat Pelepah Kelapa Sawit Terhadap Kekuatan Tarik

Authors

  • Tirta Daramawan Politeknik Manufaktur Negeri Bangka Belitung
  • Masdani Masdani Politeknik Manufaktur Negeri Bangka Belitung
  • Nanda Pranandita Politeknik Manufaktur Negeri Bangka Belitung

DOI:

https://doi.org/10.33504/jitt.v3i2.299

Keywords:

composite, oil palm frond, tensile strength

Abstract

The use of oil palm fronds is rarely used in the world of research. Oil palm fronds are only used in animal feed such as goats and cows, but in this study, oil palm fronds are used to make composite materials. Composites are a combination of reinforcement and binder. The reinforcement uses oil palm frond fiber while the binder uses resin. In this tensile test to determine the effect of the volume fraction of oil palm frond fiber with a volume fraction of 35%, 40%, and 45% while soaking in 5% NaOH for 2 hours. The results showed a tensile strength of 35% of 30.7 MPa, 40% of 38.8 MPa and 45% of 42.5 MPa. So the highest tensile strength is in the volume fraction of 45% and the lowest tensile strength is in the volume fraction of 35%.

Downloads

Download data is not yet available.

References

M. H. Dabukke, “Pemanfaatan limbah pelepah kelapa sawit (elaeis guineensis j.) sebagai bahan baku pembuatan tali serat alami,” Skripsi. Progr. Stud. Keteknikan Pertan. Fak. Pertan. Univ. Sumatera Utara, vol. 6, no. 4, p. 63, 2018.

Dimas Hidayatullah Supriyadi, “… Starter Agent Pada P, K Dan Ktk Kompos Pelepah Kelapa Sawit Study on the Utilization of the Ruminant Rumen As Bioactivation and …,” 2021, [Online]. Available: https://repository.unsri.ac.id/68568/%0Ahttps://repository.unsri.ac.id/68568/57/RAMA_54294_05101381621033_0021046202_01_front_ref.pdf

S. Muriana, “Analisis Komposit Berpenguat Serat Tandan Sawit Terhadap Kekuatan Tarik Dan Kekuatan Impak Dengan Perendaman Asap Cair,” EDUSAINTEK J. Pendidikan, Sains dan Teknol., vol. 10, no. 1, pp. 43–57, 2022, doi: 10.47668/edusaintek.v10i1.645.

R. F. Septiyanto and A. H. D. Abdullah, “Perbandingan komposit serat alam dan serat sintetis melalui uji tarik dengan bahan serat jute dan e-glass,” Gravity J. Ilm. Penelit. dan Pembelajaran Fis., vol. 1, no. 1, pp. 1–4, 2015, [Online]. Available: http://jurnal.untirta.ac.id/index.php/Gravity/article/view/2536%0Ahttp://jurnal.untirta.ac.id/index.php/Gravity/article/view/912

B. M. Law, “Rawlings,” Music. Times, vol. 126, no. 1712, p. 583, 1985, doi: 10.2307/964910.

R. Hanifi, G. Dewangga, K. Kasiadi, and E. Widianto, “Analisis Material Komposit Berbasis Serat Pelepah Kelapa Sawit Dan Matriks Polypropylene Sebagai Bahan Pembuatan Bumper Mobil,” Gorontalo J. Infrastruct. Sci. Eng., vol. 2, no. 2, p. 15, 2019, doi: 10.32662/gojise.v2i2.712.

N. Evalina, F. I. Pasaribu, and R. Efrida, “Pendampingan Pembuatan Souvenir Dari Bahan Resin Di Panti Asuhan Putri Aisyiyah Cabang Medan Kota,” MONSU’ANI TANO J. Pengabdi. Masy., vol. 4, no. 2, 2021, doi: 10.32529/tano.v4i2.1067.

G. Microsphere, H. G. M. Menggunakan, and M. Rsm, “Manutech : Jurnal Teknologi Manufaktur Efek Curing Time Komposit Serat Karbon Pada Filler Hollow,” vol. 16, no. 01, 2024.

Hanifi, R., Dewangga, G., & Widianto, E. (2019). Analisis Material Komposit Berbasis Serat Pelepah Kelapa Sawit Dan Matriks Polypropylene Sebagai Bahan Pembuatan Bumper Mobil. Gorontalo Journal of Infrastructure and Science Engineering, 2(2), 15-23.

Masdani, M., & Dharta, Y. (2018). Potensi Pengembangan Komposit Berpenguat Serat Kulit Gaharu Sebagai Material Pengganti Fiberglass Pada Pembuatan Dashboard. Manutech: Jurnal Teknologi Manufaktur, 10(01), 33-38.

Downloads

Published

29-08-2025

How to Cite

Daramawan, T., Masdani, M., & Pranandita, N. (2025). Pengaruh Variasi Fraksi Volume Komposit Berpenguat Serat Pelepah Kelapa Sawit Terhadap Kekuatan Tarik. Jurnal Inovasi Teknologi Terapan, 3(2), 552–557. https://doi.org/10.33504/jitt.v3i2.299

Most read articles by the same author(s)