Rancangan Pembangkit Listrik Tenaga Angin dan Surya dengan Turbin Angin Sumbu Vertikal Savonius Menggunakan Bentuk Sudu L dengan Kapasitas Daya Sebesar 746,5 Wh
DOI:
https://doi.org/10.33504/jitt.v1i2.57Keywords:
Solar panels, VDI2222, Wind turbinesAbstract
The design of wind and solar power generators is the goal of utilizing solar thermal energy and wind speed on the coast. To get a design result that is in accordance with the power requirement of 720 W, therefore the results of this design have followed the steps in the VDI 2222 method. From the results of the calculations that have been carried out the Savonius type wind turbine uses an L-shaped profile, with a diameter of 710 mm and a height 592 mm can produce a power of 279.072 Wh. And for the power generated from a Polycrystalline type of solar panel with a capacity of 50 Wp as much as 1 unit can produce a power of 467.5 Wh. Based on the calculation results of the combination of wind turbines and solar panels, a power of 746.6 is obtained. So that with this power it meets the capacity of the power requirement of 720 Wh. From the results of the calculation of the strength analysis of the material on the turbine shaft with material type SS 304 using SolidWorks software, it is known that the allowable stress on the material SS 304 is 200 MPa, then the resultant torsional stress with a load of 1217 Nm produces a yield strength of 1.723e+002 N/mm2(MPa), and the max torsional stress is 1.723e+000N/ mm2 (MPa).
Downloads
References
A. Bachtiar and W. Hayyatul, “Analisis Potensi Pembangkit Listrik Tenaga Angin PT. Lentera Angin Nusantara (LAN) Ciheras,” J. Tek. Elektro ITP, vol. 7, no. 1, pp. 34–45, 2018, doi: 10.21063/jte.2018.3133706.
A. Suud, R. Franchitika, and Kuswandi, “Jurnal Teknik Mesin,” J. Tek. Sipil, vol. 11, no. 2, pp. 1185–1194, 2020, [Online]. Available: http://jurnal.ubl.ac.id/index.php/JTS/article/view/1544
L. A. Gunawan, A. I. Agung, M. Widyartono, and S. I. Haryudo, “Rancang Bangun Pembangkit Listrik Tenaga Surya Portable,” J. Tek. Elektro, vol. 10, no. 1, pp. 65–71, 2021.
PERDA BABEL, “Rencana Umum Energi Daerah Tahun 2019-2050,” vol. 1, pp. 7–8, 2020.
M. Penelitian, “Angin di Desa Jada Bahrin,” pp. 66–69, 2021.
E. S. Wijianti, S. Saparin, and Y. Setiawan, “Turbin Angin Savonius Empat Sudu Dengan Variasi Model Profil Sebagai Media Belajar Mahasiswa,” Mach. J. Tek. Mesin, vol. 5, no. 2, pp. 57–61, 2019, doi: 10.33019/jm.v5i2.1414.
A. Darmawan and F. Winjaya, “Rancang Bangun Turbin Angin Aksis Vertikal Sebagai Alternatif Catu Daya Pada Perlintasan Sebidang Perkeretaapian Program Studi Teknologi Elektro Perkeretaapian. vol. III, no. November 2019.
E. Maulana and E. Djatmiko, “Perancangan Pembangkit Listrik Tenaga Angin dengan Turbin Angin Savonius Tipe-U untuk Kapasitas 100 W The Design of Wind Power Plant with a U-Type Savonius Turbine,” vol. 3, pp. 183–190, 2021.
D. I. Pantai and G. Cirebon, “No Title,” pp. 1–8.
Y. D. Novitasari, “Perhitungan Ulang Transmisi Sabuk Dan Puli Serta Pemilihan Alternator Pada Kinetic Flywheel Convertion I (Kfc I) Untuk Memaksimalkan Kerja Alat di Terminal Bbm Surabaya Group – Pertamina Perak,” no. Kfc I, pp. 57–71, 2018.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
