Potensi Serbuk Kayu Puspa Sebagai Pembuatan Papan Partikel Untuk Pengaplikasian Produk Furniture
DOI:
https://doi.org/10.33504/jitt.v3i2.304Keywords:
sawdust, particle board, bending test, compositeAbstract
In order to meet the needs and desires of human life, science and technology have experienced rapid progress. Science and technology have developed in various aspects of life. Technological progress has also occurred in composite materials which are still being researched. Particle board is an artificial board made by pressing industrial waste from plantations, forestry, and agriculture together with organic adhesives. Low-quality wood waste products that may contain cellulose and lignin, such as sawdust, twigs, turning residues, and others, can be utilized. In this study, which was carried out using the direct experimental method. The parameters used were mesh 10, 20, and 30 with volume fractions of 60%: 40%, 70%: 30%, and 80%: 20%. In this study, the results of the largest impact strength were found in the volume fraction of 60%:40% on mesh 30 with a result of 16.34 J/m2 and the smallest impact value was found in the volume fraction of 70%:30% on mesh 10 of 9.28 J/m2 where this value does not meet the SNI-03-2105-2006 standard for making particle boards.
Downloads
References
S. Byun, M. J. Irvin, B. A. Bell, M. J. Irvin, and B. A. B. Advanced, “Advanced Math Course Taking : Effects on Math Achievement and College Enrollment,” J. Exp. Educ., vol. 83, no. 4, pp. 439–468, 2014.
Diana, L., Safitra, A. G., & Ariansyah, M. N. (2020). Analisis kekuatan tarik pada material komposit dengan serat penguat polimer. Jurnal Engine: Energi, Manufaktur, dan Material, 4(2), 59-67.
Nayiroh, N. (2013). Teknologi material komposit. Universitas Islam Negeri Maulana Malik Ibrahim: Malang.
Djoko Purwanto (2016). Sifat Fisis Dan Mekanis Papan Partikel Dari Limbah Campuran Serutan Rotan Dan Serbuk Kayu, Jurnal Riset Industri Vol. 10 No. 3, Desember 2016, Hal. 125-133, Balai Riset dan Standardisasi Industri Banjabaru Jl. P. Batur Barat No.2. Banjarbaru.
Pratama, N. (2016). Pengaruh variasi ukuran partikel terhadap nilai konduktivitas termal papan partikel tongkol jagung. Pillar of Physics, 7(1).
Ahsan Risfathoni Almadani, Wahyu Gilang Hermawan (2023). Fenologi Perkembangan Diameter Dan Ketinggian Batang Tumbuhan Puspa (Schima wallichii DC. Korth) Di Wilayah Resort Wonolelo, Taman Nasional Gunung Merbabu, Nusantara Hasana Journal, 2 (12), 152-157.
Purnama, H., Jumani, J., & Biantary, M. P. (2016). Inventarisasi distribusi tegakan puspa (Schima wallichii Korth) pada berbagai tipe kelerengan di kebun raya UNMUL Samarinda (KRUS) Provinsi Kalimantan Timur. Agrifor: Jurnal Ilmu Pertanian dan Kehutanan, 15(1), 55-64.
Nursanti, N., & Adriadi, A. A. (2021). Komponen Faktor Abiotik Lingkungan Tempat Tumbuh Puspa (Schima wallichii DC. Korth) Di Kawasan Hutan Adat Bulian Kabupaten Musiwara: Components Of Environmental Abiotic Factors Where Grow Puspa (Schima wallichii Dc. Korth) In Bulian Traditional Forest Area Musirawas District. Jurnal Silva Tropika, 5(2), 438-445.
Sagita Ghaniyyah Cahyadi, Siti Hazar, Sri Peni Fitrianingsih (2020). Kajian Aktivitas Antibakteri Famili Theaceae: Puspa (Schima Wallichii) (DC) Korth dan Teh (Camellia Sinensis L.) terhadap Bakteri Penyebab Jerawat. Prosiding Farmasi, 6 (2), 339-345.
Rochmadi Ajar Permono (2018), “Mengenal Polimer dan polimerisasi”, Yogyakarta: Gajah Mada University Press, 2018.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
