Rancang Bangun Mesin Pembuatan Filament 3D Printing Dari Kemasan Mineral
DOI:
https://doi.org/10.33504/jitt.v3i2.309Keywords:
Plastic Bottle Waste, VDI 2222, FilamentAbstract
Plastic plays an important role in everyday life, especially as food and beverage packaging. However, uncontrolled use of plastic causes environmental problems, with plastic waste in Indonesia reaching 64 million tons per year. This study aims to utilize plastic bottle waste as a material for making 3D filaments, which can reduce the amount of plastic waste and support recycling. Data collection involves identifying problems, determining machine components following the stages in the VDI 2222 method. From the results of the experiment in determining the optimal size of cutting plastic bottles, namely a width of 9 mm and a thickness of 0.37 mm. Before making filaments, plastic bottles must be cleaned and heated to remove motifs that can affect the quality of the filament.
Downloads
References
Rahmi, N., & Selvi, S. (2021). Pemungutan Cukai Plastik Sebagai Upaya Pengurangan Sampah Plastik. Jurnal Pajak Vokasi (JUPASI), 2(2), 66-69.
Taufik, M., Lubis, G. S., & Ivanto, M. Rancang Bangun Mesin Pultrusion Pembuat Filamen 3D Printing Berbasis Limbah Plastik Botol PET. JTRAIN: Jurnal Teknologi Rekayasa Teknik Mesin, 4(1), 01-08.
Saputra, W. R., Suzen, Z. S., & Pristiansyah, P. (2023). Pengaruh Parameter Proses terhadap Kuat Tarik Produk Hasil 3d Printing Menggunakan Filamen ASA (Acrylonitrile Styrene Acrylate). J-Proteksion: Jurnal Kajian Ilmiah dan Teknologi Teknik Mesin, 7(2), 73-78.
Mahfud, R., Adi, Y. S., & Burhanuddin, A. (2020). Rancang Bangun Mesin Filament Extruder Yang Berbasis Arduino Mega2560 Dengan Metode Penarik Dan Penggulung Otomatis. In Proceeding Science and Engineering National Seminar (Vol. 5, No. 1, pp. 544-553).
Johnson, A., Smith, B., & Doe, C. (2019). Design and Development of a Filament Maker for 3D Printing. International Journal of Advanced Engineering Research and Science, 6(9), 120-127.
Smith, B., Johnson, A., & Brown, D. (2016). Utilization of Mineral Packaging Waste as Filament Feedstock in 3D Printing. Journal of Materials Processing Technology, 238, 157-164.
Dahlan M, Gunawan B, Hilyana F.S, 2017, Rancang Bangun Printer 3D Menggunakan Kontroller Arduino Mega 2560, Prosiding SNATIF ke-4 Tahun 2017.
8. R. A. Tya, Y. Setyoadi dan A. Burhanudin 2020, Rancang Bangun Mesin Filament Extruder Yang Berbasis Arduino Mega2560 Dengan Hasil Acrylonitrile Butadiene Styrene (Abs).
9. Abil Syafiqur Rohman , Faisal Ashari , Rizky Stighfarrinata 2024, Perancangan Ulang Mesin Filamen Ekstruder Pada Pengolahan Limbah Plastik Berbasis Semi Otomatis.
10. Dodi Iskandar , Aditya Sumardi Sunarya,Gamawan Ananto 2019 Rancang Bangun Filament Extruder Machine Dengan Pemanfaatan Limbah Plastik Jenis Low Density Polyethylene Sebagai Bahan Baku 3d Printer
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
