Analisa Pengaruh Parameter Proses FDM Terhadap Kekuatan Tarik Produk 3 Dimensi
DOI:
https://doi.org/10.33504/jitt.v3i2.287Keywords:
3D Printer, Metode Taguchi, Filamen PLA , Uji TarikAbstract
3D Printing, commonly referred to as Additive Manufacturing, has facilitated rapid advancements and brought significant changes to the manufacturing industry, particularly in revolutionizing production processes. This technology is extensively employed for rapid prototyping, allowing the creation of designs that are both visually perceptible and physically tangible, with actual volume. This research aims to examine the tensile strength of PLA+ filament under various parameter settings and assess their impact using the Taguchi method. The experiments were performed using an FDM Creality Ender 3 Pro 3D printer, which features a printing area of 220mm x 220mm x 250mm and a 0.4 mm nozzle diameter. The parameters investigated include Nozzle Temperature (220°C, 230°C, 240°C), Bed Temperature (65°C, 70°C, 75°C), and Layer Thickness (0.10mm, 0.15mm, 0.20mm). The findings revealed that the optimal tensile strength was achieved in the first trial, with a Nozzle Temperature of 220°C, Bed Temperature of 65°C, and Layer Thickness of 0.10mm, yielding an average tensile strength of 22 MPa across three replications.
Downloads
References
Malinda Christiliana1, P. Y. (2021). Optimasi Parameter Proses pada 3D Printing FDM terhadap Akurasi Dimensi Filament PLA Food Grade. Jurnal Teknologi Manufaktur, 1-8.
Bari, M, H. (2021). Optimasi Parameter Proses 3d Printing Terhadap . Prosiding Seminar Nasional , 171-174.
Riskullah Dirga Trisaplin1, Z. S. (2021). Analisis Pada Proses 3d Printer Terhadap Pengujian Tarik Menggunakan Filamen PLA Pro. Jurnal Indonesia Sosial Teknologi:p–ISSN: 2723 -6609, 2107-2117.
Wahyudi, H.P. (2021). Optimasi Parameter Proses 3D Printing Terhadap Kuat Tarik. E-ISSN 2685-8916, 39-45.
Soejanto, "Desain eksperimen dengan Metode Taguchi," Soejanto, Irwan, vol. 1, p. 1, 2009.
M. I. F. and P. Hasdiansah, “Optimasi Parameter Proses Terhadap Akurasi Dimensi Pla Food Grade Menggunakan Metode Taguchi,”,” Prosiding Seminar Nasional NCIET, vol. 1, 2020.
Ade Ferdiansyah1, P. B. (2021). Optimasi Parameter Proses 3d Printing FDM Terhadap Kekuatan Tarik Filament ABS CCTREE Menggunakan Metode Taguchi L9. Seminar Nasional Inovasi Teknologi Terapan, 224-229.
Saputra1, W. R. (2023). Pengaruh Parameter Proses terhadap Kuat Tarik Produk Hasil 3d Printing Menggunakan . J-Proteksion: Jurnal Kajian Ilmiah dan Teknologi Teknik Mesin, 73-78.
R. Avriansyah, and dkk. (2022). Optimasi Parameter Proses 3D Printing Terhadap Kekuatan Tarik Filament Polyethylene Terephthalet Glycol. Seminar Nasional Inovasi Teknologi Terapan, 395-400.
Z.S.Suzen and dkk, "Pengaruh Tipe Infill Dan Temperatur NozzleTerhadap Kekuatan Tarik Produk 3D Printing Filamen PLA+ ESUN," Sungailiat: Manutech, 2020.
Hadiansah, dkk, “Optimasi Parameter Proses 3D Printing Terhadap Kelengkungan Soft Pneumatic Gripper Dengan Menggunakan Filament Eflex”, JRM (Jurnal Rekayasa Mesin), ISSN 2477-6041 articles 9, pp.685 – 692, 2024.
Duta Sultan Paksi, H. B. (2023). Optimasilisasi Kekuatan Tarik Produk Drone Propeller FDM Dengan Filamen Petg Pada Proses 3d Printing Dengan Metode Response Surface Methodology (RSM). Skripsi yang dipublikansikan, Universitas Tanjungpura, Pontianak.
Silsa Z. (2022). Optimasi Parameter Proses 3D Printing Terhadap Kuat Tarik Filament PETG Menggunakan Metode Taguchi. Jurnal Sistem Dan Teknik Industri, 538-545.
A.Kholil. (2020). Pengaruh Layer Thickness Dan Orientasi 3D Printing Terhadap Uji Tarik Material ABS. Prosiding Seminar Nasional NCIET, 219-226.
Felix.K.A.N. (2022). Optimasi Parameter 3D Printing Menggunakan Material PP Daur Ulang pada Spesimen ASTM 638 D 10 type 1 dengan Response Surface Method. Jurnal Teknologi, 82-87.
Pristiansyah, dkk, "Pengaruh Parameter Proses pada Pencetakan 3d Printing terhadap Transparansi Filamen Petg Menggunakan Metode Taguchi," J-Proteksion Vol. 9 No. 1 Agustus 2024.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
