Analisis Pengaruh Campuran Pelumas Tellus 32 Dan Minyak Kelapa Sawit Dengan Pelumas Tellus 32 Terhadap Total Acid Number Dan Viscositas
DOI:
https://doi.org/10.33504/jitt.v1i1.53Keywords:
ANOVA;, palm oil;, TAN and viscosity;, tellus 32Abstract
Lubricants are chemical substances that are generally in liquid form, which are used in frictional components. Its function is to reduce friction, reduce wear, reduce vibration, maintain the age of the tool or component and maintain temperature during operation. The purpose of this study was to determine the effect of a mixture of lubricants on TAN (Total Acid Number) and viscosity, and to determine the effect of time on TAN (Total Acid Number) and viscosity. It was carried out with 5 different concentrations of the mixture, namely 100:0, 80:20, 90:10, 95:5, 0:100 then the concentration of this mixture was tested on the headstock gearbox of a conventional lathe DoALL LT 13 for 21 hours at each concentration, then the test is carried out on the lubricant sample repeated 3 times every 1 hour. The viscosity test on lubricating oil samples was carried out at 40°C and the TAN (Total Acid Number) test was carried out at room temperature. This research was conducted using the ANOVA method and it was concluded that the analysis showed that mixing and time had a significant effect on TAN (Total Acid Number) and viscosity.
Downloads
References
E. Supriyanto, ““Manufaktur Dalam Dunia Teknik Industri",” J. Ind. Elektro dan Penerbangan, vol. 3, no. 3, p. 1, 2020, [Online]. Available: https://jurnal.unnur.ac.id/index.php/indept/article/view/118
G. Gundara and S. Riyadi, “Pengukuran Ketelitian Komponen Mesin Bubut Dengan Standar ISO 1708,” Al JAzari J. Mech. Eng., vol. 2, no. 2, pp. 8–15, 2017.
D. Diniaty and I. Ariska, “Penentuan Jumlah Tenaga Kerja Berdasarkan Waktu Standar Dengan Metode Work Sampling Di Stasiun Repair Overhoul Gearbox ( Studi Kasus : PT . IMECO Inter Sarana ),” vol. 3, no. 1, pp. 1–6, 2017.
K. Ikhsan et al., “Rancang Bangun Alat Simulator Gearbox Untuk Abstrak,” Mesin Sains Terap., vol. 2, no. 2, p. 8, 2018.
R. A. K. Nadkarni, Guide to ASTM Test Methods for the Analysis of Petroleum 2nd Edition. 2015.
R. A. Prahmana, R. M. Sari, A. Muhyi, D. Alvian, and J. Hendrasakti, “Unjuk Kerja Mesin Diesel Generator Set Satu Silinder Menggunakan Bahan Bakar Partadex - Minyak Nabati,” J. Sci. Technol. Virtual Cult., vol. 1, no. 3, pp. 136–141, 2021, [Online]. Available: http://journal.itera.ac.id/index.php/jstvc/article/view/800%0Ahttp://journal.itera.ac.id/index.ph p/jstvc/article/download/800/262
A. Siswahyu and T. Y. Hendrawat, “STUDI PUSTAKA MODIFIKASI MINYAK NABATI SEBAGAI SUMBER BAHAN BAKU PELUMAS BIO,” J. Teknol., vol. 2, no. 2, pp. 23–32, 2013.
J. A. Oliver, Electronic data processing., vol. 44, no. 11. 1970. doi: 10.2307/3008753.
A. S. Rahmawati and R. Erina, “Rancangan Acak Lengkap (Ral) Dengan Uji Anova Dua Jalur,” Opt. J. Pendidik. Fis., vol. 4, no. 1, pp. 54–62, 2020, doi: 10.37478/optika.v4i1.333.
D. Setiawan, J. Sibarani, and I. Suprihatin, “Perbandingan efektifitas disinfektan kaporit, hidrogen peroksida, dan pereaksi fenton (H2O2/Fe2+),” Cakra Kim., vol. 1, no. 2, pp. 16–24, 2013.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
