Analisis Penyebab Getaran pada Mesin Peniris Minyak untuk Mencegah Kerusakan Produk Keripik Bayam Milik UMKM Jabal Dinar

Authors

  • Adam Maulana Politeknik Manufaktur Negeri Bangka Belitung
  • Ariyanto Ariyanto Politeknik Manufaktur Negeri Bangka Belitung
  • Eko Yudo Politeknik Manufaktur Negeri Bangka Belitung

DOI:

https://doi.org/10.33504/jitt.v3i1.307

Keywords:

Bent Shaft, Experimental Method, ISO 10816-3 Standard, Oil Draining Machine, Spinach Chips

Abstract

The oil-draining machine of UMKM Jabal Dinar experienced excessive vibrations, resulting in damage to spinach chips products and ceasing its operations for approximately ±4 years. This study aims to identify the primary causes of unstable vibrations, their impact on product quality, and modification solutions to enhance machine stability. The experimental method was applied through initial vibration measurements, alignment analysis, and evaluation of components such as shafts, bearings, and pulleys. Initial measurements showed vibrations reaching 56.6 mm/s, categorized as Zone D (hazardous) according to the ISO 10816-3 standard. Modifications were made by replacing bent shafts, worn-out bearings, and damaged pulleys. Post-modification results showed a significant reduction in vibration levels, improving machine stability, product quality, and exten.

Downloads

Download data is not yet available.

References

D. Rizky and I. Fitriana, “Jurnal Teknologi Pangan dan Hasil Pertanian Pengaruh Formulasi Tepung Rambut Jagung Dan Tepung Beras Terhadap Kandungan Gizi Dan Sensori Keripik Bayam ( Amaranthus Sp ). Staff Pengajar Fakultas Teknologi Pertanian Universitas Semarang, Semarang Info Arti,” J. Teknol. Pangan dan Has. Pertan., vol. 15, no. 2, pp. 33–40, 2020.

Rusli Rukka, B. Nurbaya, and F. Nur, “Strategi Pengembangan Bisnis Keripik Bayam (Amaranthus hybridus) Dengan Pendekatan Business Model Kanvas,” Sos. Ekon. Pertan., vol. 14, no. 1, pp. 41–54, 2018, [Online]. Available: file:///C:/Users/Ramadhani Azzahra/Downloads/3622-Article Text-7414-1-10-20180219.pdf.

A. Mufarrih, Z. F. Emzain, N. Qosim, R. Monasari, A. Harijono, and P. W. Nugroho, “Penerapan mesin peniris minyak untuk meningkatkan kualitas keripik umkm wonosari malang,” Community Dev. J. J. Pengabdi. Masy., vol. 4, no. 4, pp. 7881–7885, 2023.

K. Plosokerep, K. Sananwetan, and K. Blitar, “Bayam Crispy : Produk Inovasi Daun Bayam Sebagai Upaya Pemberdayaan,” vol. 1, no. 3, 2023.

M. S. Ummah, No 主観的健康感を中心とした在宅高齢者における 健康関連指標に関する共分散構造分析Title, vol. 11, no. 1. 2019. [Online]. Available: http://scioteca.caf.com/bitstream/handle/123456789/1091/RED2017-Eng-8ene.pdf?sequence=12&isAllowed=y%0Ahttp://dx.doi.org/10.1016/j.regsciurbeco.2008.06.005%0Ahttps://www.researchgate.net/publication/305320484_SISTEM_PEMBETUNGAN_TERPUSAT_STRATEGI_MELESTARI

H. Harmen, I. Sofi’i, and R. Baharta, “Modifikasi Mesin Peniris Minyak Sistem Spinner,” J. Ilm. Tek. Pertan. - TekTan, vol. 12, no. 3, pp. 147–157, 2021, doi: 10.25181/tektan.v12i3.1934.

D. Adia and L. Ramahani, “Modifikasi Mesin Pencacah Pelepah Dan Daun Kelapa Sawit Dengan Sistem Rotary Untuk Bahan Baku Kompos,” 2020.

P. Akhir, “Karakteristik Getaran yang Terjadi pada Kasus Paralel Misalignment , Angular Misalignment dan Bearing Failure pada Generator Bangka Belitung,” 2024.

P. Akhir and D. Ismarini, “BELITUNG,” 2022.

Downloads

Published

26-02-2025

How to Cite

Maulana, A., Ariyanto, A., & Yudo, E. (2025). Analisis Penyebab Getaran pada Mesin Peniris Minyak untuk Mencegah Kerusakan Produk Keripik Bayam Milik UMKM Jabal Dinar. Jurnal Inovasi Teknologi Terapan, 3(1), 214–219. https://doi.org/10.33504/jitt.v3i1.307

Issue

Vol. 3 No. 1 (2025): Jurnal Inovasi Teknologi Terapan

Section

Articles

License

Copyright (c) 2025 Jurnal Inovasi Teknologi Terapan

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Most read articles by the same author(s)

1 2 > >>