Optimalisasi Parameter Proses Mesin CNC Milling Terhadap Kekasaran Permukaan Yang Akan Digunakan Untuk Membuat Cetakan Kampas Rem Depan
DOI:
https://doi.org/10.33504/jitt.v3i2.271Keywords:
CNC Milling, Surface Roughness, Brake Pads, Taguchi Method, Parameter OptimizationAbstract
This study aims to determine the optimal parameters in the CNC Milling process to produce low surface roughness and improve the quality of brake pad molds. By applying the Taguchi method, the results showed that the process parameters have a significant effect on surface roughness. Data analysis revealed that increasing feed speed and depth were positively correlated with surface roughness. Of the parameters tested, feed speed had the largest contribution of 40.46%, followed by feed depth of 14.01%, and spindle speed of 12.36%. The optimal parameter combination proposed to achieve the best surface roughness is a feed speed of 100 mm/min, a feed depth of 0.2 millimeters, and a spindle rotation of 3343 RPM. These findings provide an important contribution to the automotive industry to improve the efficiency and quality of brake pad production, a component that plays a crucial role in vehicle safety.
Downloads
References
J. Manik, “Analisa Laju Keausan Kanvas Ren Cakram Sepeda Motor Berbahan Limbah Kulit Kerang Bulu Dan Serbuk Besi Serta Resin,” Uhn, Vol. 49, Pp. 69–73, 2022.
M. Asep, “Pembuatan Komposit Matrik Aluminium Diperkuat Pasir Silika Tailing Timah,” Skripsi. Politeknik Manufaktur Negeri Bangka Belitung : Bangka Belitung, 2022.
Sutikno, “Pembuatan Bahan Gesek Kampas Rem Otomotif,” Pp. 1–23, 2019.
E. Bimantoro And Darmanto, “Analisis Pengaruh Jumlah Alur Terhadap Keausan Pada Kampas Rem,” Majalah Ilmiah Momentum, Vol. 18, Pp. 151–1555, 2022.
F. Svahn, “Surface Roughness And Its Effect On Adhesion And Tribological Performance Of Magnetron Sputtered Nitride Coatings,” Coatings, Vol. 14, No. 8, 2003, Doi: 10.3390/Coatings14081010.
F. B. M. Badri, J. Prisno, “Karakteristik Kekerasan Dan Keausan Kanvas Rem Cak- Ram Bahan Komposit Dengan Filler Palm Slag,” Materials Science And Engineering, Vol. 9, No. 7, Pp. 17–21, 2018.
T. A. Guna, “Pengaruh Fraksi Volume Dan Suhu Sintering Matrik Aluminium Berpenguat,” Repository Polman Babel, Vol. D, 2024.
P. Seminar, N. Tahunan, T. Mesin, S. Xi, T. Iv, And U. Gadjah, “Mat - 099 Proceeding Seminar Nasional Tahunan Teknik Mesin Xi (Snttm Xi) & Thermofluid Iv Universitas Gadjah Mada (Ugm), Yogyakarta, 16-17 Oktober 2012,” No. Snttm Xi, Pp. 16–17, 2012.
A. G. Dylan, S. Sugiyarto, A. Wanto, A. Budi, And S. Sukanto, “The Pembuatan Komposit Matrik Aluminium Diperkuat Silicon Carbida Dan Rice Husk Ash Dengan Metode Metalurgi Serbuk,” Lontar Jurnal Teknik Mesin Undana, Vol. 10, No. 02, Pp. 61–68, 2023, Doi: 10.35508/Ljtmu.V10i02.13481.
A. P. Tr Adiningtiah, W Astuti, Re Puwanto, “Pengaruh Bahan Baku Dan Proses Pembuatan Terhadap Kualitas Produk Pastry Di Sotis Hotel Kupang,” Jurnal Perhotelan, Destinasi, Vol. 3, No. 1, Pp. 48–57, 2022.
A. Mahendra, E. Yudo, And Z. Kurniawan, “Analisis Pengaruh Nilai Parameter Proses Pemesinan Milling Terhadap Kekasaran Permukaan Almunium 7075,” Jurnal Inovasi Teknologi Terapan, Vol. 1, No. 2, Pp. 345–351, 2023, Doi: 10.33504/Jitt.V1i2.35.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
