Analisis Pengaruh Perlakuan Panas Terhadap Sifat Kekerasan Baja Karbon S55C

Authors

  • Fathur Rohman Politeknik Manufaktur Negeri Bangka Belitung
  • Eko Yudo Politeknik Manufaktur Negeri Bangka Belitung
  • Yuliyanto Yuliyanto Politeknik Manufaktur Negeri Bangka Belitung

DOI:

https://doi.org/10.33504/jitt.v3i2.296

Keywords:

Cutting edge, Hardness value, Heat treatment

Abstract

          This study aims to analyze the effect of the heat treatment (quenching) process on the hardness of S55C carbon steel used as cutting blades for plastic shredding machines. JIS S55C steel was chosen as an alternative material, with hardening temperature variations of 850°C, 950°C, and 1050°C, and cooling media consisting of well water, young coconut water, and cooking oil (3 liters each). The test results showed that the hardness of the steel before heat treatment was 29.6 HRC. After heat treatment, the highest hardness was achieved at a temperature of 950°C with a value of 56 HRC using well water as the cooling medium. This study concludes that temperature variations and cooling media significantly influence the hardness of S55C steel.

Downloads

Download data is not yet available.

References

D. Anantanur, B. Setyoko, and M. Murni, “Analisa Struktur Mikro Dan Kekerasan Pada Baja S55C Setelah Dilakukan Proses Tempering,” J. Mekanova Mek. …, vol. 9, no. 1, pp. 1–7, 2023, [Online]. Available: http://jurnal.utu.ac.id/jmekanova/article/view/7289

N. Nugraha, D. S. Pratama, S. Sopian, and N. Roberto, “Rancang Bangun Mesin Pencacah Sampah Organik Rumah Tangga,” J. Rekayasa Hijau, vol. 3, no. 3, pp. 169–178, 2020, doi: 10.26760/jrh.v3i3.3428.

P. Akhir, “Pengaruh Temperatur Dan Media Pendingin Pada Proses Heat Treatment Terhadap Sifat Mekanis,” 2022.

S. Ibrahim, M. Hersaputri, and V. I. Panjaitan, “Pembuatan Mata Pisau Mesin Pencacah Sampah Plastik dengan Material AISI D2 yang Dikeraskan,” J. Vokasi Teknol. Ind., vol. 3, no. 1, pp. 36–40, 2021, doi: 10.36870/jvti.v3i1.216.

Alwarits, Daswarman, and M. Nasir, “Pengaruh Media Pendingin pada Proses Hardening terhadap Peningkatan Kekerasan Baja Karbon Sedang,” Automot. Eng. Educ. Journals, vol. 3 No 4, no. e-ISSN:2302-335X, pp. 1–5, 2014.

P. Trihutomo, “Analisa Kekerasan pada Pisau Berbahan Baja Karbon Menengah..,” J. Tek. Mesin, Tahun 23, No. 1, April 2015 29, pp. 28–34, 2015.

Yopi Handoyo, “Pengaruh Quenching Dan Tempering Pada Baja Jis Grade S45C Terhadap Sifat Mekanis,” J. Ilm. Tek. Mesin, vol. 3, no. 2, pp. 104–105, 2015, [Online]. Available: http://ejournal.unismabekasi.ac.id/

R. Saputra and E. Tyastomo, “Perbandingan Kekerasan Dan Struktur Mikro Pegas Daun Yang Mengalami Proses Heat Treatment,” Bina Tek., vol. 12, no. 2, p. 185, 2017, doi: 10.54378/bt.v12i2.72.

H. Setiawan, “Pengujian Kekerasan Dan Komposisi Kimia Produk Cor Propeler Alumunium,” Pros. SNST Semarang, vol. 4, no. 6, pp. 31–36, 2014.

U. Pandapotan and M. Mulyadi, “Pengaruh Media Pendingin terhadap Porositas dan Kekuatan Tarik menggunakan Pengelasan SMAW DCSP pada Material Pipa Baja Karbon SCH40,” Innov. Technol. Methodical Res. J., vol. 3, no. 3, p. 8, 2024, doi: 10.47134/innovative.v3i3.108.

Downloads

Published

29-08-2025

How to Cite

Rohman, F., Yudo, E., & Yuliyanto, Y. (2025). Analisis Pengaruh Perlakuan Panas Terhadap Sifat Kekerasan Baja Karbon S55C. Jurnal Inovasi Teknologi Terapan, 3(2), 443–449. https://doi.org/10.33504/jitt.v3i2.296

Issue

Vol. 3 No. 2 (2025): Jurnal Inovasi Teknologi Terapan

Section

Articles

License

Copyright (c) 2025 Jurnal Inovasi Teknologi Terapan

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Most read articles by the same author(s)

1 2 3 > >>