Rancang Bangun Jig and Fixture Pembengkok Pipa Baja ST37 untuk Rangka Kursi Kelas
DOI:
https://doi.org/10.33504/jitt.v4i2.457Keywords:
Jig and-fixture, Ovalization, Pipe Bending, ST37 pipe , VDI 2222 MethodAbstract
Designing a pipe bending jig and fixture by applying the stages of the VDI 2222 method, so that a design suitable for the production process of class chairs is obtained. At this stage, written data regarding the bending of ST37 pipes and research results using the VDI 2222 research method are collected from reputable sources such as journals, books, research reports, scientific papers, and articles. From the bending results, it can be concluded that the ST37 pipe responds quite well when bent using this tool, producing good bends and only experiencing slight ovalization compared to other pipes. Therefore, this 1.4 mm diameter ST37 pipe becomes the best product choice compared to other ½-inch pipes. Based on the analysis of the tool I designed and built, it can be concluded that the tool using the VDI 2222 method is capable of bending ST37 pipe with a diameter of 1.4 mm shows quite good bending results, only experiencing slight ovalization.
Downloads
References
N. L. K. A. M. Paramitha dan I. A. K. A. Pradnyaswari, “Kursi Bar Dengan Material Pipa Besi Dan Velg Bekas,” Vstkr, vol. 4, no. 2, hlm. 167–179, Sep 2024, doi: 10.59997/vastukara.v4i2.3795.
A. Suganda dan Anggi Josetio Prayoga, “Product Innovation Factors and Selling Prices can Increase Sales Marketing at Keyzura Furniture,” Managiere, vol. 2, no. 1, hlm. 8–14, Jun 2024, doi: 10.69747/managiere.v2i1.54.
S. A. Tronvoll, J. Ma, dan T. Welo, “Deformation behavior in tube bending: a comparative study of compression bending and rotary draw bending,” Int J Adv Manuf Technol, vol. 124, no. 3–4, hlm. 801–816, Jan 2023, doi: 10.1007/s00170-022-10433-7.
M. Makrus dan H. Febiansyah, “The Value Of Digital Economy Adoption In Bangka Belitung SMEs: A Vam Model Focusing On Creativity And Innovation,” vol. 13, no. 03, 2024.
R. Reniati dan F. Faisal, “Green SME Business Model in Bangka Belitung: A Value Chain Analysis Approach,” JICP, vol. 6, no. 4, hlm. 82–97, Okt 2023, doi: 10.32535/jicp.v6i4.2574.
A. A. Alamtra, “Perancangan Jig Dan Fixture Untuk Rangka Prototipe Sepeda Motor Listrik,” 2023.
N. I. S. Hussein, M. N. Ayof, M. S. Zainuddin, dan J. Srithorn, “Design Of A Low Vibration Grinding Jig And Fixture For Pipe Beveling Prior To Welding”.
M. A. Kaleem, P. Frohn-Sörensen, R. Steinheimer, dan B. Engel, “Hybrid tools for tube bending processes using additive manufacturing and digital twin,” Int J Mater Form, vol. 19, no. 2, hlm. 44, Jun 2026, doi: 10.1007/s12289-026-02009-7.
C. C. Okpala, “Human-Centered Design of Jigs and Fixtures: A Data-Driven Approach to Productivity, Safety, and Manufacturing Sustainability,” vol. 2, no. 1, 2026.
N. M. P. Adi, P. Winata, A. Nugraha, dan A. S. Hutama, “Perancangan Mesin Conveyor Untuk Peningkatan Efisiensi Produksi di PT. XYZ”.
W. Bunganaen, Y. Toai, dan D. P. Mangesa, “Rancang Bangun Mesin Pemipil Jagung Dengan Metode VDI 2222,” LJTMU, vol. 9, no. 02, hlm. 53–59, Des 2022, doi: 10.35508/ljtmu.v9i02.9322.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
