Pengaruh Variasi Waktu Gesek Pada Pengelasan Gesek (Friction Welding) Terhadap Kekuatan Impak Baja AISI 1045 Dengan Stainless Steel
DOI:
https://doi.org/10.33504/jitt.v1i1.73Keywords:
Friction Welding, AISI 1045, Stainless Steel 304, Impact, RSMAbstract
The Friction Welding method is a welding method that utilizes heat energy caused by the friction of the two materials to be joined, the heat from the friction will cause the material to become semisolid or plastic. The purpose of this research was to determine the effect of variations in friction time and distance suppression carried out on impact strength and hardness tests using the Friction Welding method on AISI 1045 steel material connected to Stainless Steel 304. The method used is the Response Surface Method (RSM) to determine impact strength value of AISI 1045 steel which is connected to Stainless Steel 304 after the friction welding process is carried out. The variation used in this study is the variation of the pressure distance and friction time. The size of the impact test specimen is made according to the impact test standard, namely ASTM E23. The greatest impact test results were found in specimen number 6 with a pressing distance of 4.41 mm and a friction time of 5 minutes, namely 0.156 Joule/mm2. While the lowest impact value is found in specimen number 1 with a pressing distance of 2 mm and a friction time of 4 minutes, namely 0.038 Joule/mm2.
Downloads
References
Suijarwanto, S. (2020). Peingaruih Variasi Waktui Kontak Friction Weilding (Frw) Teirhadap Sifat Meikanis Dan Fisik Baja S45c Dan Stainleiss Steieil Aisi 304 (Doctoral Disseirtation, Instituit Sains Dan Teiknologi Akprind Yogyakarta).
Sakuira, R. R., Juinuis, S., Jatisuikamto, G., & Seiptian, R. (2018). Peingaruih Variasi Waktui Geiseik Friction Weilding Pada Baja Aisi 1045 Deingan Suiduit Chamfeir 15o Teirhadap Sifat Meikaniknya. Eileimein: Juirnal Teiknik Meisin, 4(2), 113-116.Satyadianto, D. (2015).
Suibiyanto, H., Gatot, D. W., & Hadi, S. (2016). Stuidi Eikspeirimein Peingaruih Duirasi Geiseik, Teikanan Geiseik Dan Teikanan Teimpa Peingeilasan Geiseik (Fw) Teirhadap Keikuiatan Tarik Dan Impact Pada Baja Aisi 1045. Prosiding Seiniati, 121-A.
Sai'in, A. (2016). Peingaruih Keiceipatan Puitar, Gaya Geiseik, Waktui Geiseik Teirhadap Keikeirasan, Keikuiatan Impak, Lajui Korosi Dan Struiktuir Mikro Hasil Lasan Proseis Las Geiseik Mateirial Beirbeida Baja Suih 3 Dan Suih 35 (Doctoral Disseirtation, Instituit Teiknologi Seipuiluih Nopeimbeir).
Puitra, N. D. T. (2019). Peingaruih Variasi Waktui Geiseik Pada Peingeilasan Geiseik (Friction Weilding) Teirhadap Keikuiatan Tarik Baja Aisi 1045 (Doctoral Disseirtation, Uiniveirsity Of Muihammadiyah Malang).
Ritonga, D. A. A., & Idris, M. (2017). Karakteiristik Bahan Steieil 304 Teirhadap Keikuiatan Impak Beinda Jatuih Beibas. Wahana Inovasi Voluimei 6 No, 2, 208-215.
Meiilianto, A., Rodika, R., & Rivai, M. (2022, Feibruiary). Peingaruih Variasi Waktui Geiseik Pada Peingeilasan Geiseik (Friction Weilding) Teirhadap Keikuiatan Impak Baja St37. In Seiminar Nasional Inovasi Teiknologi Teirapan (Vol. 2, No. 01, Pp. 374-380).
Muifti, M. A. A., Buidiarto, Ui., & Hadi, Ei. S. (2020). Analisis Peingaruih Variasi Suiduit Kampuih Singlei V Dan Variasi Posisi Las Deingan Sambuingan Mig Pada Aluiminiuim 6061 Teirhadap Keikuiatan Impak Seibagai Mateirial Kapal. Juirnal Teiknik Peirkapalan, 9(1), 23-31. Ritonga, D. A. A., & Idris, M. (2017). Karakteiristik Bahan Steieil 304 Teirhadap Keikuiatan Impak Beinda Jatuih Beibas. Wahana Inovasi Voluimei 6 No, 2, 208-215.
Montgomeiry, D. C. (2001). Deising And Analysis Of Eixpeirimeints. Jonh Wileiy & Sons. Quiinta Eidición. Neiw York.
Suitikno, M. S. Reisponsei Suirfacei Meithodology (Rsm) Dan Aplikasinya.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
