Implementasi HMI Pada Penyortiran Buah Jeruk Berbasis PLC
DOI:
https://doi.org/10.33504/jitt.v2i1.177Keywords:
CX-programer, Human-machine interface (HMI), NB-designer, Orange fruits sorter, PLCAbstract
Human Machine Interface (HMI) is a means of liaison and communication media between machines and humans. In this research, HMI was created for citrus fruit sorters that have not yet integrated HMI. This research was carried out to develop a citrus fruit sorter so that it is integrated with HMI. The method used is to implement an HMI on a citrus fruit sorter which is integrated with Arduino, Arduino as a sensor control controller. The orange fruit sorter is installed with a relay which is controlled by an Arduino for input signals to the PLC as the main control which has been programmed using the CX-Programmer. Monitoring and control can be accessed via the HMI display which has been programmed using NB-Designer. The HMI test results were successfully displayed in the form of a graphic visualization containing indicators and ON and OFF buttons for actuators and sensors, as well as displaying data on the number of oranges sorted. The test results carried out by the sorter were able to distinguish green and yellow oranges with an accuracy rate of 93.75% and the implementation of HMI was successful in monitoring and controlling the process of sorting citrus fruit.
Downloads
References
A. Fajaruddin and D. Notosudjono, “PERANCANGAN ALAT CERDAS PENYORTIRAN BUAH JERUK BERBASIS INTERNET OF THINGS ( IOT ) Program Studi Teknik Elektro , Fakultas Teknik-Universitas Pakuan Program Studi Teknik Elektro , Fakultas Teknik-Universitas Pakuan,” Jurna Online Mhs. Bid. Tek. Elektro, vol. 1, no. 1, pp. 1–11, 2020. https://jom.unpak.ac.id/index.php/teknikelektro/article/view/1373/0
S. Wulandari and B. Satria, “Rancang Bangun Alat Pendeteksi Warna Menggunakan Arduino Uno Berbasis IoT (Internet Of Things),” Paradig. - J. Komput. dan Inform., vol. 23, no. 1, 2021, doi: 10.31294/p.v23i1.9861.
I. Iwan, L. Lahming, J. Jamaluddin, and N. Lestari, “Rancang Bangun Mesin Sortasi Buah Jeruk Manis Berdasarkan Warna Berbasis Arduino Nano,” J. Pendidik. Teknol. Pertan., vol. 8, no. 1, p. 1, 2022, doi: 10.26858/jptp.v8i1.19297.
A. Setiawan, D. E. Pranata, and D. A. S. Tiyas, “Rancang Bangun Mesin Pemilah Buah Jeruk Berdasarkan Ukuran Berkapasitas 50 Kg,” J. Tek. Mesin, vol. 8, no. 1, 2022.
P. Narahawarin, B. G. Sudarsono, and J. Saputro, “Jurnal Sains dan Teknologi Widyaloka Rancang bangun alat penyortir buah jeruk Berdasarkan warna dengan sensor TCS3200 Jurnal Sains dan Teknologi Widyaloka,” vol. 1, pp. 213–217, 2022.
W. Sahputra and A. Alhafiz, “Implementasi Sensor TCS200 pada rancang bangun alat filter buah jeruk busuk menggunakan teknik counter berbasis microcontroller,” no. x, pp. 1–10, 2021.
D. H. Simanjuntak, “Sistim Monitoring Pada Sorting Machine dengan HMI Berbasis PLC,” vol. 2, no. 1, 2021.
B. Luhung, B. A., Sumardi, S., & Setiyono, “Penerapan PLC HMI (Human Machine Interface) Untuk Monitoring Objek Pada Sistem Konveyor,” Pengemb. Sumber Daya Perdesaan dan Kearifan Lokal Berkelanjutan VIII, pp. 1–11, 2018.
S. Sadi, “Implementasi Human Machine Interface pada Mesin Heel Lasting Chin Ei Berbasis Programmable Logic Controller (Implementation of Human Machine Interface on Chin Ei’s Heel Lasting Machine Based on Programmable Logic Controller),” J. Tek., vol. 9, no. 1, 2020, doi: 10.31000/jt.v9i1.2561.
Prismanto, T. Herdantyo, D. T. Nugroho, Y. Ramadhani, and A. Mubyarto, “Desain Dan Simulasi Sistem HMI (Human Machine Interface) Berbasis Citect SCADA Pada Konveyor Proses Di Industri,” Semin. Nas. Edusaintek, pp. 253–262, 2018.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
