Analisis Keandalan Mesin Digester Menggunakan Metode Failure Mode And Effect Analysis Di Pabrik CPO PT Mas
DOI:
https://doi.org/10.33504/jitt.v4i1.416Keywords:
Digester Machine, FMEA, RPN, Palm OilAbstract
The digester machine is a critical unit in the palm oil processing industry, functioning to soften and mash palm fruit to enable optimal oil extraction. The reliability of this machine plays an important role in ensuring the continuity and efficiency of crude palm oil (CPO) production. This study aims to analyze the reliability of the digester machine at the CPO plant of PT MAS using the Failure Mode and Effect Analysis (FMEA) method. Research data were obtained through direct field observation, interviews with operators and maintenance technicians, and analysis of historical machine failure data from January to December 2024. Each failure mode was evaluated based on severity, occurrence, and detection parameters to determine the Risk Priority Number (RPN), which was used to establish maintenance priorities. The results indicate that the Expeller Arm and Short Arm components have the highest RPN values, identifying them as the most critical components with the highest risk of failure. Based on these findings, maintenance recommendations and corrective actions focused on critical components are proposed to improve the reliability of the digester machine, reduce downtime, and support efficient and continuous CPO production at PT MAS
Downloads
References
O. Hikmawan et al., “10 TON TBS / JAM DI UNIT STERILIZER PABRIK KELAPA SAWIT DETERMINATION OF PERFORMANCE OF PALM OIL FACTORY DIGESTER,” pp. 43–50.
B. Prakoso, F. Luthfiani, L. Adria, and S. Zein, “H 2301-9069,” vol. 22, no. 1, pp. 34–44, 2025.
M. Nurul Ihsan, D. Wicaksono, and S. Sehono, “Uji Keausan Kampas Rem Berbahan Limbah Organik Menggunakan Metode Ogoshi,” Tek. STTKD J. Tek. Elektron. Engine, vol. 8, no. 1, pp. 92–96, 2022, doi: 10.56521/teknika.v8i1.559.
R. Y. Prasetya, S. Suhermanto, and M. Muryanto, “Implementasi FMEA dalam Menganalisis Risiko Kegagalan Proses Produksi Berdasarkan RPN,” vol. 20, no. 2, pp. 133–138, 2021.
H. N. Siregar and S. Munthe, “Analisa Perawatan Mesin Digester dengan Metode Reliabity Centered Maintenance pada PTPN II Pagar Merbau,” vol. 3, no. November, pp. 87–94, 2019.
M. Fmea and D. I. Pt, “ISSN 2548-6646 Online ANALISA RISK PRIORITY NUMBER ( RPN ) TERHADAP KEANDALAN KOMPONEN MESIN THRESHER DENGAN MENGGUNAKAN,” vol. 9, no. 2, pp. 74–81, 2021.
“1 , 2 1,2,” vol. 2, no. 12, pp. 4687–4696, 2023.
A. Khaleil, I. Pamungkas, and H. Tri, “Identification of Damage in Press Stations Using the Failure Mode and Effect Analysis ( FMEA ) Method at PT . Beurata Subur Persada,” vol. 9, no. 1, pp. 204–211, 2024, doi: 10.31572/inotera.Vol9.Iss1.2024.ID329.
O. E. E. P. T. Xyz, “DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS,” vol. 9, no. 2, pp. 82–90, 2021.
Z. Aini et al., “Steam requirements and mass balance in digesters and screw presses at palm oil mill,” vol. 9, no. 2, pp. 109–120, 2024, doi: 10.22219/jemmme.v9i2.37043.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
