Analisis dan Simulasi Mesin Pencetak Keripik Telur Cumi
DOI:
https://doi.org/10.33504/jitt.v4i1.405Keywords:
Molding Machine, Production Efficiency, Simulation, Squid Egg Chips, VDI 2222Abstract
Squid egg chips are one of the typical foods of Bangka Belitung, which are still produced manually, making them inefficient in terms of time and energy. Manual production of squid egg chips in Bangka Belitung faces challenges in terms of efficiency and product consistency. This study aims to design and simulate a squid egg chip molding machine using a systematic approach based on the VDI 2222 method. The stages include needs analysis, concept development, technical design, and evaluation through load simulation using software such as Fusion 360 and MD Solid. The developed machine has an electric motor drive system, pulley and belt transmission, and main components such as a hopper, dough press screw, and dough mold. The simulation results show that the machine design works well and can withstand an operational load of up to 118.87 N, equivalent to ±12 kg. The system can be operated by one person with more efficient production time compared to the manual method. However, the dough cutting mechanism still needs improvement to achieve a uniform and aesthetically optimal chip shape.
Downloads
References
T. Irawan, I. A. Wahyudie dan H. , “Pengaruh Cetakan Terhadap Hasil Kericu Pada Mesin Pembuat Kericu,” Jurnal Inovasi Teknologi Terapan, pp. 96-101, 2025.
B. Rollastin, “PKM PENINGKATAN PRODUKTIVITAS KELOMPOK USAHA PEMBUAT KULINER KHAS BANGKA,” Jurnal Pengabdian Kepada Masyarakat, p. 36, 2021.
M. A. Pratama, L. Febrilia dan A. Kurniawan, “ANALISIS PROKSIMAT AMPIANG IKAN “KERAPING MALITA”,” Journal of Aquatropica Asia, pp. 72-76, 2023.
Yuliyanto, M. Subhan, R. Napitupulu dan A. Arliansyah, “MESIN PENGADUK ADONAN UNTUK MENINGKATKAN PRODUKSI AMPIANG,” Jurnal Pengabdian Kepada Masyarakat, pp. 28-35, 2024.
P. Yawenda, Husman dan I. A. Wahyudie, “Analisis Efisiensi Dan Produktivitas Mesin Produksi Keripik Telur Cumi (Keritcu),” Jurnal Inovasi Teknologi Terapan, 2025.
D. D. Manek, “RANCANG BANGUN MESIN MIXER IODISASI GARAM HALUS SISTEM,” Jurnal Ilmiah Teknik Industri , pp. 131-141, 2022.
H. Mahmudi, “Analisa Perhitungan Pulley dan V-Belt pada Sistem Transmisi Mesin Pencacah,” Jurnal Mesin Nusantara, pp. 40-44, 2021.
N. P. Saputeri, W. Y. Afrida dan A. F. Asyha, “PENERAPAN TEKNOLOGI OVEN PENGERING UNTUK MENINGKATKAN EFISIENSI PRODUKSI KERUPUK CUMI DI PESISIR LAMPUNG,” JURNAL ABDIMAS ILMIAH CITRA BAKTI, pp. 131-143, 2025.
N. Novelia, N. dan F. Panjaitan, “ANALISIS PENERAPAN METODE FULL COSTINGDAN VARIABLE COSTINGTERHADAP PERHITUNGAN HARGA POKOK PRODUKSI PADA HOME INDUSTRYKERICU CANTIQA,” JURNAL AKUNTANSI BISNIS DAN KEUANGAN , pp. 28-34, 2024.
R. L. Gama, J. S. Bale dan A. Y. Tobe, “Perancangan Mesin Penepung Daun Lamtoro dengan Menggunakan Metode VDI2222,” Jurnal Teknik Mesin, pp. 17-21, 2023.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
