Rancangan Fixture Kursi Roda Untuk Pengguna Kursi Roda
DOI:
https://doi.org/10.33504/jitt.v4i1.361Keywords:
Wheelchair, Fixture, MPKR, VDI 2222, SolidWorksAbstract
Mobility for persons with disabilities remains hindered by the lack of wheelchair-friendly transportation facilities, particularly in securing and stabilizing the wheelchair during travel. This study aims to design a wheelchair fixture system for Wheelchair User Vehicles using the VDI 2222 design method, which includes four main stages: planning, concept development, design, and finalization. Concept selection analysis was carried out using the Composite Performance Index (CPI) method, resulting in the optimal combination of a spring clamp, vertical bearing guide, and upper locking locator. Simulation using SolidWorks shows that the design can withstand a load of 657.05 N (65 kg) with a safety factor value of up to 3.000, indicating the system is safe and reliable. This design is expected to provide an innovative solution for disability-friendly vehicles with a lightweight, functional, and independently operable system.
Downloads
References
E. Paselle, E. Khairina, M. Taufik, and F. F. Zhan, “Public Transport Accessibility Policy for Disabled Batam City in the Concept of Sustainable Transportation,” Soshum J. Sos. dan Hum., vol. 14, no. 1, pp. 17–27, Mar. 2024, doi: 10.31940/SOSHUM.V14I1.17-27.
“Introduction to Assistive Technology Capacity (ATA-C) Assessment”.
Subkhan and A. Anggry, “Manutech : Jurnal Teknologi Manufaktur Rancangan Pengarah Dan Penepat ( Jig And Fixture ) Kursi Roda Pada Kerangka Mobil Listrik Pengguna Kursi Roda,” vol. 13, no. 02, 2021.
D. Kendaraan Disabilitas Pengguna Kursi Roda Desain Kendaraan Disabilitas Pengguna Kursi Roda Yudi Oktriadi, A. Fricilya, G. Pratama Putra, and P. Manufaktur Negeri Bangka Belitung, “Desain Kendaraan Disabilitas Pengguna KursiRoda,” Manutech J. Teknol. Manufaktur, vol. 16, no. 01, pp. 47–52, Aug. 2024, doi:10.33504/MANUTECH.V16I01.293.
“Wheeled mobility devices for use in motor vehicles,” 2001, Accessed: Oct. 13, 2025. [Online]. Available: www.iso.ch
K. D. Klinich et al., “Independent Safety for Wheelchair Users in Automated Vehicles,” 2023. [Online]. Available: http://deepblue.lib.umich.edu/handle/2027.42/176171
M. Ayundyahrini, S. Suprapto, F. Fahma, W. Sutopo, E. Pujiyanto, and P. Anggraeni, “Parameter Utama Dan Kesiapan Lembaga Penilaian Kesesuaian Kursi Roda Manual Dalam Pengembangan Standar Di Indonesia,” J. Stand., vol. 23, no. 1, pp. 33–42, Mar. 2021, doi: 10.31153/JS.V23I1.902.
K. Frost, G. Bertocci, and C. Smalley, “Wheelchair tiedown and occupant restraint practices in paratransit vehicles,” PLoS One, vol. 13, no. 1, p. e0186829, Jan. 2018, doi: 10.1371/JOURNAL.PONE.0186829.
A. Faktor et al., “Analisa Faktor Struktural pada Kesamaan Kesempatan Transportasi untuk Kemudahaan Mengakses Angkutan Umum Bagi Disabilitas,” J. Komposit J. Ilmu-ilmu Tek. Sipil, vol. 9, no. 1, pp. 195–203, Feb. 2025, doi: 10.32832/KOMPOSIT.V9I1.15122.
Siti Maimunah, Nurliana Cipta Apsari, Hadiyanto Abdul Rachim. 2024. Aksesibilitas Inklusif: Implementasi Infrastruktur Publik Ramah Disabilitas Di Indonesia (Sebuah Literatur Reveiw). Focus : Jurnal Pekerjaan Sosial.7(2).250-276.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
