Analisis Pengaruh Variasi Kecepatan Putaran Mesin Peniris Minyak Terhadap Kualitas Penirisan Keripik Bayam Milik UMKM Jabal Dinar
DOI:
https://doi.org/10.33504/jitt.v3i2.275Keywords:
Rotation speed (rpm), Oil-draining machine, Oil content, Spinach chipsAbstract
Spinach chips are an innovative and healthy snack made primarily from spinach leaves mixed with flour and fried, where the oil-draining process plays a crucial role in determining the final product's quality. Home industries often rely on traditional methods, such as air-drying, although oil-draining machines have been introduced to Jabal Dinar SMEs. However, these machines require improvement due to excessively high and unstable rotation speeds. This study aims to identify the causes of instability and analyze the effects of varying rotation speeds (300, 400, 500 rpm) and draining durations (40, 60, 80 seconds) on product quality. The results indicate that the optimal speed is 400 rpm with a draining duration of 80 seconds, achieving a final weight of 77% while maintaining the texture and crispness of the spinach chips without breaking. In contrast, a speed of 500 rpm removes more oil, but the excessive centrifugal force damages the product due to the chips' thin and fragile nature.
Downloads
References
U. Nuramadani, “Upaya Pemberdayaan Ekonomi Masyarakat Melalui Pengolahan Tanaman Bayam Yang Tumbuh Sekitar Perkarangan Di Kelurahan Padang Jati,” Tribut. J. Community Serv., vol. 3, no. 1, pp. 16–23, 2022, doi: 10.33369/tribute.v3i1.17619.
O. Sativa et al., “Analisis nilai tambah bayam sebagai bahan baku keripik bayam,” J. Ekon. Pertan. Pembang., vol. 14, no. 2, pp. 39–50, 2017.
I. Azmy, B. A. Bajuri, and P. Londa, “Perancangan Alat Peniris Minyak Pada Makanan Dengan Pengatur Putaran Kapasitas 2 Kg,” J. Tek. Mesin Sinergi, vol. 20, no. 2, pp. 151–157, 2022, doi: 10.31963/sinergi.v20i2.3513.
P. Fisioterapi, P. Kasus, S. C. I. Ais, and A. N. L. Th, “Tahun 2019,” p. 2019, 2019.
R. Z. Hilmi, R. Hurriyati, and Lisnawati, “No 主観的健康感を中心とした在宅高齢者における 健康関連指標に関する共分散構造分析Title,” vol. 3, no. 2, pp. 91–102, 2018.
A. Mufarrih, Z. F. Emzain, N. Qosim, R. Monasari, A. Harijono, and P. W. Nugroho, “Penerapan mesin peniris minyak untuk meningkatkan kualitas keripik umkm wonosari malang,” Community Dev. J. J. Pengabdi. Masy., vol. 4, no. 4, pp. 7881–7885, 2023.
M. Dengan and P. Kecepatan, “Jse-43 Jse-44,” vol. 5, no. 2, pp. 43–49, 2022.
J. P. P. Iptek, “Iptek bagi Masyarakat Home Industri Keripik Bayam Teknik Sipil , Institut Teknologi Adhitama Surabaya Teknik Informatika , Institut Teknologi Adhitama Surabaya,” vol. 1, no. 1, pp. 7–12, 2017.
B. K. Daniel and T. Harland, “HIGHER EDUCATION RESEARCH METHODOLOGY: A Step-by-Step Guide to the Research Process,” High. Educ. Res. Methodol. A Step-by-Step Guid. to Res. Process, pp. 1–140, 2017, doi: 10.4324/9781315149783.
H. Mahmudi, “Analisa Perhitungan Pulley dan V-Belt Pada Sistem Transmisi Mesin Pencacah,” J. Mesin Nusant., vol. 4, no. 1, pp. 40–46, 2021, doi: 10.29407/jmn.v4i1.16201.
Hamimi, Tamrin, and S. Setyani, “Uji Kinerja Mesin Peniris Minyak Goreng Pada Pengolahan Keripik,” J. Teknol. Ind., vol. 16, no. 1, pp. 91–100, 2011.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
