Pengaruh Merk Filamen Pla Terhadap Kuat Tarik Spesimen Uji Astm D638 Type V
DOI:
https://doi.org/10.33504/jitt.v1i2.16Keywords:
3D printing, Brand, Tensile Test, TaguchiAbstract
3D printing is Additive Manufacture which is and additive manufacturing. Since it was discovered and developed in 1981, the presence of 3D printing has transformed into an important element of manufacturing technology. Starting from printing spare parts and even making houses in this era, the role of 3D printing cannot be separated. This study aimed to determine the effect of various brands of polylactic acid (PLA) type filaments on the tensile strength test. The Taguchi method with the Orthogonal Array L_27 3^13 experimental design with 5 factors is the method used in this study. obtained by the tensile test parameters with the highest effect on the layer thickness of 0.15, M filament, print speed of 55 mm/s, then the nozzle temperature of 230˚C, and finally the Z orientation of 40˚. It was observed that nozzle tempe Nozzle temperature, print speed, and z orientation were observed to havethe layer thickness and the choice of filament significantly affect the tensile test strength.
Downloads
References
W. Prasong, P. Muanchan, A. Ishigami, S. Thumsorn, T. Kurose, and H. Ito, “Properties of 3D Printable Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blends and Nano Talc Composites,” J. Nanomater., vol. 2020, 2020, DOI: 10.1155/2020/8040517.
gita suryani Lubis, muhammad Taufiqurrahman, and M. Ivanto, “Analisa Pengaruh Parameter Proses Terhadap Uji Tarik Produk Hasil 3D Printing Berbahan Polylatic Acid (1)* Gita Suryani Lubis, (2) Muhammad Taufiqurrahman, (3) Muhammad Ivanto,” J. Engine Energi, manufaktur, dan Mater., vol. 5, no. 2, pp. 39–44, 2021.
D. Andriyansyah, Herianto, and Purfaji, “Optimasi Parameter Proses 3D Printing Terhadap Kuat Tarik Filamen Polylactic Acid,” pp. 61–68.
A. Finali, A. F. Hanafi, and R. E. P.U., “Analisis Variasi Pattern 3D Printing terhadap Kekuatan Tarik,” J-Proteksion, vol. 5, no. 1, pp. 16–19, 2021, doi: 10.32528/jp.v5i1.4320.
B. A. Setyawan and Y. Ngadiyono, “Analisis Pengaruh Tingkat Kelembaban Filamen Pla Terhadap Nilai Kekuatan Mekanik Hasil Cetak 3D,” vol. 7, no. April, pp. 1–11, 2022.
kurniawan Eko Putra, “Pengaruh Kekuatan Tarik Dan Tekan Pada Bahan Di 3D Printer,” Http://Repository.Umsu.Ac.Id/Xmlui/Handle/123456789/8154, pp. 4–8, 2019.
Y. Subakti, Hasdiansah, and Z. Kurniawan, “Pengaruh Media, Temperatur Dan Waktu Perlakuan Annealing Pada Spesimen Standar ASTM D638 Type IV Menggunakan Filamen ST PLA,” Sprocket J. Mech. Eng., vol. 3, no. 1, pp. 7–14, 2021, DOI: 10.36655/sprocket.v3i1.569.
W. H. Pratama, Hasdiansah, and Husman, “Optimasi Parameter Proses 3D Printing Terhadap Kuat Tarik Material Filamen PLA + Menggunakan Metode Taguchi,” Sprocket J. Mech. Eng., vol. 3, no. 1, pp. 39–45, 2021, DOI: 10.36655/sprocket.v3i1.568.
A. Sugandi, amin nur Akhmadi, and M. Qurohman, “Analiss kekuatan uji tarik terhadap hasil 3d printer creality ender 5pro,” pp. 1–4.
T. Rusianto and S. Huda, “A riview : jenis dan pencetakan 3d ( 3d printing ) untuk pembuatan prototipe,” J. Teknol., vol. Volume 12, no. 28, pp. 14–21, 2019.
M. H. Bari, “Optimasi Parameter Proses Pada 3D Printing FDM Terhadap Kekuatan Tarik Filament PLA Food Grade Menggunakan Metode Taguchi L27,” 2021.
R. D. Salindeho, J. Soukota, and R. Poeng, “Pemodelan pengujian tarik untuk menganalisis sifat mekanik material,” J. J-Ensitec, vol. 3, no. 1, pp. 1–11, 2018.
F. Van Der Klift, Y. Koga, A. Todoroki, M. Ueda, Y. Hirano, and R. Matsuzaki, “3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens,” Open J. Compos. Mater., vol. 06, no. 01, pp. 18–27, 2016, doi: 10.4236/ojcm.2016.61003.
Douglas C. Montgomery, design and analysis of experiments. 2017.
H. A. Pamasaria, T. H. Saputra, A. S. Hutama, and C. Budiyantoro, “Optimasi Keakuratan Dimensi Produk Cetak 3D Printing berbahan Plastik PP Daur Ulang dengan Menggunakan Metode Taguchi,” JMPM (Jurnal Mater. dan Proses Manufaktur), vol. 4, no. 1, pp. 12–19, 2020, doi: 10.18196/jmpm.4148.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
