Analisis Sifat Termal Dan Kuat Impak Green-Sandwich Composite Berdasarkan Variasi Susunan Lapisan (Stacking Sequence)
DOI:
https://doi.org/10.33504/jitt.v4i2.463Keywords:
Green Material, Impact, Sandwich Composite, Thermal InsulationAbstract
The use of environmentally friendly composite materials has been increasingly developed as an alternative to conventional materials for automotive components. This study aimed to investigate the effect of stacking sequence variations on the thermal insulation performance and impact strength of Green Sandwich Composites reinforced with coconut coir fiber, woven fiberglass, a balsa wood core, and polyester resin. The specimens were fabricated using the hand lay-up method combined with vacuum bagging, followed by thermal insulation and Charpy impact testing. The data were analyzed using One-Way ANOVA. The results showed that the GF–NF–C–NF–GF configuration exhibited the best performance, achieving a thermal insulation efficiency of 40.65% and an impact strength of 198.98 kJ/m². However, the One-Way ANOVA results indicated that stacking sequence variations had no statistically significant effect on either parameter at a 5% significance level. Nevertheless, the GF–NF–C–NF–GF configuration is recommended as the optimum stacking sequence because it provides the best combination of thermal and mechanical performance for environmentally friendly automotive bumper applications.
Downloads
References
N. Nurfatihayati, C. D. Alfarisi, D. Drastinawati, K. Khairat, M. Akbar, And C. Maharani, “Pembuatan Komposit Dari Serat Sabut Kelapa dan Resin Polyester Sebagai Material Untuk Helm,” J. Bioprocess, Chem. Environ. Eng. Sci., Vol. 4, No. 2, Pp. 57–64, 2023, Doi: 10.31258/Jbchees.4.2.57-64.
T. D. Pambudi, N. Wahyudi, And K. Nur, “Analisis Ketahanan Panas Komposit Serat Sabut Buah Kelapa Bermatriks Epoxy Menggunakan Pengujian Thermogravimetric Analysis,” Vol. 9, No. 1, Pp. 9–11, 2024.
M. Borrega And L. J. Gibson, “Mechanics Of Balsa (Ochroma Pyramidale) Wood,” Mech. Mater., Vol. 84, Pp. 75–90, 2015, Doi: Https://Doi.Org/10.1016/J.Mechmat.2015.01.014.
P. Pratiwi And M. Perdana, “Pengaruh Variasi Urutan Lapisan Terhadap Sifat Akustik Dan Termal Komposit Ramah Lingkungan Berpenguat Serat Ampas Tebu Dan Getah Pinus,” Vol. 12, No. 02, Pp. 273–284, 2023.
M. F. Ardiansyah And F. Y. Utama, “Pengaruh Metode Fabrikasi Terhadap Ketahanan Impak Komposit Sandwich Serat Karbon,” J. Ilmu Ekon. Pendidik. Dan Tek., Vol. 03, Pp. 149–154, 2026.
A. Sanjaya, Juanda, And Yulidarta, “Pengaruh Fraksi Volume Dan Varias Perendaman Naoh Terhadap Kekuatan Tarik Dan Impak Komposit Berpenguat Serat Ampas Tebu,” Pros. Semin. Nas. Inov. Teknol. Terap., Vol. 02, No. 1, Pp. 120–129, 2022.
E. Widodo And I. Iswanto, Buku Ajar Mekanika Komposit dan Bio-Komposit, 2022nd Ed. Sidoarjo, Jawa Timur: Umsida Press, 2022. Doi: 10.21070/2022/978-623-464-042-7.
I. A. Wahyudie, S. Rachmadini, And M. Riva, “Analisis Pengaruh Penambahan Serbuk Pelepah Kelapa Sawit Pada Komposit Berbasis Semen Untuk Peredam Panas,” Vol. 15, No. 02, Pp. 362–369, 2024, Doi: 10.35970/Infotekmesin.V15i2.2216.
D. Agam Widhiansyah And Widjanarko, “Effect Of Alkali Treatment And Volume Fraction On The Impact Strength Of Coconut Fiber Composite (Cocofiber)-Epoxy,” J. Tek. Mesin J-Meeg, Vol. 4, No. 1, Pp. 359–364, 2024, [Online]. Available: Http://Jurnal.Polinema.Ac.Id/Index.Php/J-Meeg
F. Y. Utama, “Perbandingan Variasi Matriks Resin Epoxy Dan Resin Polyester Pada Komposit Carbon Fiber Terhadap Kekuatan Uji Impak Dengan Standar,” Vol. 03, Pp. 60–68, 2026.
I. S. Barkah, Y. Yuliyanto, And M. Haritsah Amrullah, “Pengaruh Web Tarantula Sebagai Filler Bio Komposit Pada Pengujian Impak,” J. Inov. Teknol. Terap., Vol. 2, No. 1, Pp. 170–178, 2024, Doi: 10.33504/Jitt.V2i1.131.
J. Gemanial, R. Napitupulu, And J. Juanda, “Analisis Pemanfaatan Serbuk Gergaji Kayu dan Egg Tray Sebagai Bahan Alternaltif Peredam Suara Pada Genset,” J. Inov. Teknol. Terap., Vol. 3, No. 2, Pp. 424–433, 2025, Doi: 10.33504/Jitt.V3i2.276.
N. A. Dwi Ramadina, Y. Yuliyanto, And M. Subhan, “Analisis Kekuatan Lentur Komposit Berbasis Serat Daun Alam Sebagai Alternatif Material Bilah Turbin,” J. Inov. Teknol. Terap., Vol. 4, No. 1, Pp. 37–45, 2026, Doi: 10.33504/Jitt.V4i1.393.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
