Pengaruh Parameter Pemesinan CNC Bubut Terhadap MRR dan Kekasaran Permukaan Material ST 37 Menggunakan Metode Taguchi
DOI:
https://doi.org/10.33504/jitt.v4i1.404Keywords:
CNC lathe, Surface roughness, MRR, Machine parametersAbstract
The machining process in the manufacturing world greatly influences its quality and productivity. One of the tools in the machining process is a CNC lathe that has parameters for its use process. The process parameters in the CNC machining process are spindle speed, feed rate, and cutting depth. Some aspects that are greatly influenced by process parameters are surface roughness and MRR (Material Removal Rate), which function as efficiency in improving product quality. This study aims to analyse the effect of machining process parameters on surface roughness and MRR on test specimens made of ST 37 material. The method in this study uses the Taguchi method with the aim of increasing productivity and product and process quality. The results of this study show surface roughness based on the use of two types of tools on ST 37 material, with the DNMG 105608-MA tool producing a roughness value of 1.128 µm and the CNMG tool producing a value of 0.865 µm. Meanwhile, the MRR value produced by the DNMG 105608-MA tool is 1,072.8 mm³/s, which is slightly superior to that of the CNMG 120408-MK tool, with an MRR value of 1,032.5 mm³/s.
Downloads
References
Azib FB. Pengaruh Variasi Kecepatan Potong, Gerak Makan, Dan Kedalaman Potong Pada Mesin Bubut Terhadap Tingkat Keausan Pahat HSS. Jurnal Rekayasa Mesin 2017:1–10.
Wulandari R, A M. Pengaruh Variasi Putaran Mesin Terhadap Waktu Pengeboran Dengan Material Aluminium Al 6063 Pada Mesin Bor Duduk. Jurnal Mechanical Engineering (J Mech Eng) 2021:1–23.
C TK. Analisis Efisiensi Dan Efektifitas Penggunaan Mesin Produksi Pada CV. Harapan Baru Surakarta. 2009.
Indrawan E. Analisis Kualitas Geometri Mesin Bubut Maximat Super 11. INVOTEK 2020:71–80.
Rifqhi Syahputra N. Analisis Pengaruh Parameter Pemesinan CNC Bubut Terhadap MRR dan Kekasaran Permukaan pada Material ST 37 Menggunakan Metode Taguchi. Politeknik Manufaktur Negeri Bangka Belitung, 2025.
Sihombing JD. Analisa Material Removal Rate (MRR) Baja SKD11 pada Proses CNC Turning dengan Menggunakan Metode Taguchi. Jurnal Teknik Mesin 2022.
Gilbran A, Oktriadi Y, Yudo E. Analisis Pengaruh Parameter Terhadap MRR Pada Benda Kerja di Mesin CNC Turning dengan Metode Taguchi. Jurnal Inovasi Teknologi Terapan 2024:9–14.
Ananta EM, Nurrohkayati AS, Mujianto A, Waluyo HT. Optimasi Nilai Kekasaran Permukaan Baja ST 37 Berdasarkan pada Parameter Proses Pembubutan Menggunakan Metode Taguchi. Simposium Nasional RAPI XXI–2022 FT UMS, 2022, p. 65–72.
Syach S, Nurrohkayati AS, Pranoto SH. Optimasi parameter untuk kekasaran permukaan pada proses pembubutan baja ST37 dengan menggunakan metode Taguchi. TEKNOSAINS: Jurnal Sains, Teknologi Dan Informatika 2022:114–20.
Kondo MY, C. P, Souza J V, Ribeiro M V, Alves MC. Optimizing Cutting Parameters for Cutting Power and Roughness in VAT32® Turning with an Experimental Al2O3 Method. Procedia CIRP 2018.
Groover PM. Fundamentals of Modern Manufacturing: Materials, Processes and Systems. New York: Wiley; 2010.
Septiaji P. Aluminium 1100 Dengan Pengaruh Variasi Tegangan Dan Gap Pada Proses Electro-Chemical Machining (ECM) Menggunakan Elektroda Terisolasi. Jurnal Teknik Mesin 2016.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
