Rancangan Dan Simulasi Alat Pemotong Bata Ringan Gerak Horizontal
DOI:
https://doi.org/10.33504/jitt.v4i1.355Keywords:
Cutting Machine, Hebel Lightweight Bricks, Production Efficiency, Solidworks, VDI 2222 MethodAbstract
This research aims to design and simulate a Hebel-type lightweight brick cutting machine with a horizontal motion system to improve cutting efficiency and precision at the TACON Tangan Construction production house in Bangka Belitung. The development of this tool is based on the needs of small industry players to increase productivity and reduce production costs, because most of the cutting process is still done manually. The design uses the VDI 2222 method which includes the planning, concept development, technical design, and design completion stages. This machine works with an electric motor transmission system that drives the cutting wire through an eccentric shaft, resulting in horizontal reciprocating motion. Simulation results using SolidWorks show that the machine works stably, efficiently, and safely. The design considers aspects of ergonomics, safety, and ease of maintenance. Theoretically, this design can increase cutting effectiveness by up to 40% and support the productivity of lightweight brick manufacturing.
Downloads
References
M. J. Rampe, J. Z. Lombok, V. A. Tiwow, S. M. T. Tengker, And J. Bua, ‘Characterization Of Silica (Sio2) Based On Beach Sand From Sulawesi And Sumatra As Silicon Carbide (Sic) Base Material’, Journal Of Chemical Technology And Metallurgy, Vol. 58, No. 3, Pp. 467–476, 2023, Doi: 10.59957/Jctm.V58i3.75.
E. Dewa And R. Pasaribu, ‘Analisis Kandungan Silikon Dioksida (Sio2) Pasir Pantai Koka Kabupaten Sikka Dengan Metode Ekstraksi’, Jurnal Fisika Pps Unm, Vol. 2, Pp. 76–79, 2020.
S. Arif, F. Razi, And T. M. Fadhli, ‘Analisis Potensi Pasir Kuarsa Sebagai Bahan Baku Semikonduktor Daerah Kecamatan Dusun Selatan Dan Dusun Utara, Kab. Barito Selatan, Provinsi Kalimantan Tengah’, Jurnal Geosains Dan Teknologi, Vol. 8, No. April, Pp. 36–44, 2025, Doi: 10.14710/Jgt.8.1.2025.34-41.
S. Deshariyanto, Dwi; Fansuri, ‘Pengaruh Komposisi Campuran Terhadap Kuat Tekan Paving Block’, Jurnal Ilmiah Mitsu, Vol. 5, No. Vol 5 No 1(2017): Jurnal Ilmiah Mitsu, P. 6, 2017, [Online]. Available: Https://Www.Ejournalwiraraja.Com/Index.Php/Ft/Article/View/339/296%0ahttps://Doi.Org/10.24929/Ft.V5i1.339
D. Perayuda Mascik, Z. S Suzen, And I. Ary W, ‘Pengaruh Salinitas Pasir Terhadap Kuat Tekan Bata’, Jurnal Inovasi Teknologi Terapan, Vol. 1, No. 1, Pp. 77–83, 2023, Doi: 10.33504/Jitt.V1i1.80.
N. Okviyani, J. Rahmat, I. Ridhayani, A. Nurdin, And A. F. Mahmuda, ‘Dampak Variasi Skim Coat Dan Foam Agent 1 / 60 Terhadap Produksi Bata Ringan’, Vol. 7, No. 1, Pp. 9–16, 2025.
H. Kaselle, ‘Pengaruh Substitusi Fly Ash Terhadap Kuat Tekan Dan Penyerapan Bata Beton Ringan Seluler (Cellular Lighweight Concrete)’, Prosiding 4th Seminar Nasional Penelitian & Pengabdian Kepada Masyarakat 2020, Vol. 1, No. 1, Pp. 135–139, 2020.
E. Susanti, E. Setyo Cahyono, And H. Sukarjo, ‘Peningkatan Efisiensi Biaya Produksi Bata Merah Melalui Penerapan Teknologi Inovatif Dan Online Marketing Di Kabupaten Banyuasin’, Sewagati, Vol. 6, No. 5, 2022, Doi: 10.12962/J26139960.V6i5.211.
Imam Mustafa, Reni Suryanita, And Harnedi Maizir, ‘Analisis Sifat Mekanik Bata Ringan Yang Terpapar Suhu Tinggi’, Sainstek (E-Journal), Vol. 8, No. 1, Pp. 11–17, 2020, Doi: 10.35583/Js.V8i1.25.
R. T. Journal Et Al., ‘Http://Jurnal.Umsb.Ac.Id/Index.Php/Rangteknikjournal’, Vol. 5, No. 2, 2022.
R. Adhiharto, A. B. Nusantoro, A. I. Komara, And D. H. Wigenaputra, ‘Perancangan Ulang Dan Analisa Mesin Benchtop Injection Molding Dengan Metode Vdi 2222’, Jtrm (Jurnal Teknologi Dan Rekayasa Manufaktur), Vol. 5, No. 2, Pp. 153–168, 2023, Doi: 10.48182/Jtrm.V5i2.148.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
