Modifikasi Mesin Pencacah Rumput Gajah Menghasilkan Bahan Baku Kompos

Authors

  • Tulus Lamganda Sianturi Program Studi Teknik Mesin Fakultas Sains dan Teknik Universitas Bangka Belitung
  • Saparin Saparin Jurusan Teknik Mesin Fakultas Sains dan Teknik Universitas Bangka Belitung
  • Rodiawan Rodiawan Program Studi Teknik Mesin Fakultas Sains dan Teknik Universitas Bangka Belitung
  • Yudi Setiawan Program Studi Teknik Mesin Fakultas Sains dan Teknik Universitas Bangka Belitung
  • Eka Sari Wijianti

DOI:

https://doi.org/10.33504/jitt.v3i1.337

Keywords:

Compost, elephant grass, shredder

Abstract

The increase in the area of agricultural land in Indonesia makes the need for fertilisers continue to increase. Compost is one type of natural organic that is widely known by farmers that comes from organic materials that undergo weathering processes due to interactions between microorganisms (decaying bacteria) that work in it. Elephant grass is one of the plants that can be used as compost and has enormous potential. The existing elephant grass chopping machine still uses a serrated blade. So that the chopping cannot be chopped properly. In this study, the elephant grass chopping machine will be modified into an elephant grass chopping machine that uses HSS (High Speed Steel) material blades and the machine is driven by a 1 hp electric motor. The purpose of this research is to change the elephant grass chopping machine with HSS (High Speed Steel) blades and to make cutting faster. The research method used is experimental research using the French method and the Reverse Enginering Method The design process of the elephant grass chopping machine uses the Solidwork application. The test material used is 1000gr for one test. The resulting average is perfectly chopped as much as 897 gr, not perfectly chopped as much as 17.7 gr left / in the tube 84 gr, with a time of 60.08 seconds. The production capacity of the machine is 56.06 kg/hour. The machine that has been made is able to chop elephant grass with product efficiency.

Downloads

Download data is not yet available.

References

Fitriansyah, M. R., 2012. Modifikasi Mesin Pencacah Sisa Tanaman Tipe Circular Saw. Skripsi. Fakultas Pertanian . Universitas Sriwijaya.Indralaya.

Roidah, I.S., 2013. Manfaat Penggunaan Pupuk Organik untuk Kesuburan Tanah. Jurnal Bonorowo 1, 30–43.

Arfiyanto, M. (2020). Perancangan Pencacah Rumput Pakan Ternak. Jurusan Pendidikan Teknik Mesin Universitas Negeri Yogyakarta.

Wahyono. (2005). Menyulap Sampah Menjadi Kompos : system open windrow bergulir, Pusat Pengkajian dan Penerapan Teknologi Lingkungan BPP Teknologi, Jakarta.

Saparin., Wijianti, E.S., Wibowo, B.S., & Setiawan, Y. 2023. Pengaruh Kemiringan Sudut Hopper Input Pada Mesin Pencacah Sampah Organik Terhadap Kapasitas Produksi Mesin. Jurnal Teknologi Manufaktur Vol. 15. No. 01.

Saparin, S., Wijianti, E.S & Wibowo, B. (2022). Mesin Pencacah Sampah Organik Tipe Piringan Dengan Kemiringan Sudut Hopper Input 60 derajat. Machine : Jurnal Teknik Mesin, Vol. 8 No. 2, Hal. 40-46.

Panjaitan, U. 2020. Perancangan Mesin Pencacah Rumput Multifungsi Dengan Metode Vdi 2221. Jurnal Presisi. Vol. 22, No.1.

Hamarung M A, Jasman J. 2019. Pengaruh Kemiringan Dan Jumlah Pisau Pencacah Rumput Untuk Kompos. Jurnal Program Studi Perawatan Dan Perbaikan Mesin Akademi Teknik Soroako. Vol. 3 No. 2.

Abdi, M. Z., Saparin, S., Setiawan, Y., & Wijianti, E. S. (2023). Design of bajakah root chopping machine into tea powder. AUSTENIT, 15(2), 139-143.

Pranata, F.A., Wijianti, E.S., & Saparin. 2021. Rancang Bangun Mesin Pencacah Daun Pelawan Portable Dengan Variasi Kemiringan Sudut Mata Pisau. Jurnal Austenit Vol. 13 No. 2.

Aziz, (2012) Proses Pembuatan Pisau Pencacah Pada Mesin Pencacah Rumput Secara Kontinyu. Skripsi Program Studi Teknik Mesin Universitas Negeri Yogyakarta.

Downloads

Published

26-02-2025

How to Cite

Sianturi, T. L., Saparin, S., Rodiawan, R., Setiawan, Y., & Sari Wijianti, E. (2025). Modifikasi Mesin Pencacah Rumput Gajah Menghasilkan Bahan Baku Kompos. Jurnal Inovasi Teknologi Terapan, 3(1), 145–149. https://doi.org/10.33504/jitt.v3i1.337

Most read articles by the same author(s)