Aplikasi Monitoring Volume Cairan Infus pada Pasien
DOI:
https://doi.org/10.33504/jitt.v3i2.259Keywords:
Infusion, loadcell, infrared, ESP3, realtimeAbstract
Infusion or intravenous fluids are given through a vein to replace fluids or nutrients lost from the body. Manual monitoring of infusions by nurses often carries a risk of error. To overcome this, a tool was developed that uses a loadcell sensor to measure liquid weight, an infrared sensor to detect droplets, and an ESP32 module to send data in real time to a database and display it on a monitor screen or website. This system provides a warning when the infusion fluid is less than 100 ml. Even so, there is an error in the loadcell sensor of 0.1% -0.2%, and the drip sensor readings are sometimes not detected due to certain factors. Apart from monitoring infusion fluids, the system also allows input of patient data via the website. Overall, the tool functions as intended, although there are still some aspects that need improvement.
Downloads
References
S. Riskitasari, F. Hamida, W. Aulia, N. Arizaldi, and S. Adhisuwignjo, “Sistem Monitoring Level dan Tetesan Cairan Intravena Pada Pasien Rawat Inap Menggunakan Komunikasi NRF24L01,” Pros. SNATIF ke-4 Tahun 2017, vol. 3, no. 2015, pp. 153–160, 2017.
A. M. . U. R. Rini Maharani., “Sistem Monitoring Dan Peringatan Pada Volume Cairan Intravena (Infus) Pasien Menggunakan Arduino Berbasis Website,” Sist. Monit. Dan Peringatan Pada Vol. Cairan Intraven. Pasien Menggunakan Arduino Berbas. Website, vol. 07, no. 03, pp. 97–108, 2019.
P. A. Rosyady, A. S. S. Sukarjiana, N. U. Habibah, N. Ihsana, A. R. C. Baswara, and W. R. Dinata, “Monitoring Cairan Infus Menggunakan Load Cell Berbasis Internet of Things (IoT),” Techné J. Ilm. Elektrotek., vol. 22, no. 1, pp. 97–110, 2023, doi: 10.31358/techne.v22i1.345.
Y. R. Putung, D. Noya, V. Aror, J. Sundah, and M. Patabo, “Rancang Bangun Pemantauan Cairan Infus Dengan Arduino Nano Berbasis Android,” Jambura J. Electr. Electron. Eng., vol. 5, no. 1, pp. 01–06, 2023, doi: 10.37905/jjeee.v5i1.15352.
Misnaniarti and M. Najmah, “Monitoring Ketersediaan Obat Terhadap Pelayanan Kesehatan Masyarakat Di Dinas Kesehatan Kota Lubuklinggau,” vol. 2006, no. 39, p. (23 November 2023), 2021.
D. Sasmoko and Y. A. Wicaksono, “IMPLEMENTASI PENERAPAN INTERNET of THINGS(IoT)PADA MONITORING INFUS MENGGUNAKAN ESP 8266 DAN WEB UNTUK BERBAGI DATA,” J. Ilm. Inform., vol. 2, no. 1, pp. 90–98, 2017, doi: 10.35316/jimi.v2i1.458.
A. F. Shinta, “Rancang Bangun Sistem Monitoring Volume Dan Laju Tetes Infus Pasien Menggunakan Nodemcu Esp8266,” Skripsi Univ. Negeri Semarang, vol. D, pp. i–89, 2020.
A. S. Sanitya, “Monitoring Cairan Infus Menggunakan Load Cell Berbasis Internet of Things (IoT),” Techné J. Ilm. Elektrotek., vol. 22, no. 1, pp. 97–110, 2023, doi: 10.31358/techne.v22i1.345.
Rony Setiawan, “Apa Itu Prototype? Kenapa Itu Penting?,” dicoding. Accessed: Nov. 21, 2024. [Online]. Available: https://www.dicoding.com/blog/apa-itu-prototype-kenapa-itu-penting/
D. Anggraini, A. Santosa, E. Eriyandi3, I. Endrawijaya, A. Zulkarnain, and R. Giyat Naufaldhy, “Arsitektur Prototype Air Traffic Surveillance Data Berbasis Ads-B Sebagai Pembelajaran Di Program Studi Teknik Navigasi Udara,” J. Penelit., vol. 8, no. 2, pp. 121–130, 2023, doi: 10.46491/jp.v8i2.1472.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
