Pengaruh Media Pendingin Bio Solar Pada Perlakuan Panas Untuk Meningkatkan Kekerasan Roda Gigi Sproket
DOI:
https://doi.org/10.33504/jitt.v1i2.38Keywords:
Sprocket Gears, Surface Hardness, Hardening, Bio DieselAbstract
The sprocket gears is one part of motorcycle that functions as a power transfer transmission. The service of gears can be influenced by several aspect, one of which is the hardness of sprocket gears. The hardness of the sprocket gear material can be increased by various mathod, one of which is heat treatment. This study used an experimental method with the aim of knowing the effect of bio diesel as the main cooling medium on increasing the hardness of non-original sprocket gears. The research process included carburizing and hardening processes on 2 non-original brands at temperature of 910°C and then cooled using bio diesel and water cooling media with a holding time of 30 minute and 60 minutes. The results showed that the heat treatment process could increase the hardness of brand A with a normal hardness of 104 HB resulting in the highest value in the parameter holding time of 60 minute and water cooling medium with a hardness value of 111,6 HB and brand B of normal hardness with a value of 110,8 HB producing the highest value is the holding time parameter of 60 minutes and water cooling medium with a hardness value of 115,9 HB. Based on the result obtained, water cooling medium is higher than bio diesel cooling medium.
Downloads
References
. Sugito B. and Hariyanto A., “ Pengaruh karburisasi roda gigi sprocket aspira dengan ahm terhadap perubahan sifat fisis dan mekanis “, 2007.
. Soeleman S. and Isahudin M., “ Analisis Karakteristik Gear Sprocket Standard dan Racing pada Sepeda Motor ”, SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin, 2(2), 2008. Raul, Widiyanti, and Poppy, “ Pengaruh Variasi Kecepatan Potong dan Kedalaman Potong pada Mesin Bubut terhadap Tingkat Kekasaran Permukaan Benda Kerja ST 41 ”, Jurnal Teknik Mesin, 2016.
. Sailon S. and Rizal S., ” ANALISIS PERUBAHAN KEKERASAN DAN STRUKTUR MIKRO HASIL PERLAKUAN PANAS PRODUK PANDAI BESI DENGAN MENGGUNAKAN MEDIA PENDINGIN BATANG PISANG. AUSTENIT “, 6, 2014.
. Zulfandy D.,” Analisa Uji Kekerasan Pada Material Baja ST37 Setelah Mengalami Perlakuan Panas Annealing “, Doctoral dissertation, 2019.
. Prapaskah C. B. (2020). Pengaruh Karburisasi Padat Dan Quenching Pada Suhu 800 Dengan Waktu Penahanan 4,6,8 Jam Menggunakan Media Arang Batok Kelapa Dan Kulit Telur Sebagai Katalisator Terhadap Nilai Kekerasan Baja Karbon Rendah.
. Waas, K., & Danny, V. (2020). Pengaruh Holding Time Dan Variasi Media Quenching Terhadap Nilai Kekerasan Baja Karbon Rendah St 42 Pada Proses Pengkarbonan Padat Menggunakan Arang Batok Biji Pala (Myristica Fagrans). Jurnal Simetrik, 10(1).
. Agustian E., (2021), Analisis Pengaruh Media Pendingin Dengan Kombinasi Waktu Penahanan Pendingin Terhadap Nilai Kekerasanbaja Aisi 1045 Pada Proses Quenching.
. Arlingga A. (2021). Pengujian Kekerasan Dan Struktur Mikro Plat Baja Karbon Rendah Setelah Proses Pemanasan Dengan Suhu 8000c Di Quenching Bio Solar. Majalah Teknik Simes, 15(2), 8-14.
. Purwanto H., “ Analisa Quenching Pada Baja Karbon Rendah Dengan Media Solar “, Momentum, 7(1), 2011.
. Adawiyah, R., & Hendrawan, A. (2014). Pengaruh Perbedaan Media Pendingin Terhadap Strukturmikro Dan Kekerasan Pegas Daun Dalam Proses Hardening. Poros Teknik, 6(2), 96-102.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
