Pengaruh Perlakuan Asap Cair Tempurung Kelapa dan Larutan Kunyit Terhadap Kekuatan Impak Komposit Serat Serai Wangi (Cymbopogon Nardus) Matriks Polyester
DOI:
https://doi.org/10.33504/jitt.v2i2.173Keywords:
Liquid smoke, 2k factorial design, Impact strength, Composite, Turmeric solutionAbstract
Currently, using natural fibers as composite reinforcement is a new pattern in material technology. Natural fiber-reinforced composite materials have sustainable potential in the industrial field because the natural fibers used significantly impact the composite's mechanical properties. However, the chemical content of natural fibers can affect the mechanical properties of the composite. Therefore, chemical treatment of fibers that will be used as composite reinforcement must be done to produce mechanical properties such as optimal impact strength. This research aims to see the effect of treatment time on citronella fibers and the type of treatment solution on the resulting impact strength. The method used in this research is a 2k factorial design. In this study, the impact test used the ISO 179-01 standard reference with the treatment of citronella fiber soaked using liquid smoke solution and fiber boiling using turmeric solution, and the length of the treatment process was 1 hour and 3 hours. The results showed that the interaction between the type of solution and the length of treatment time affected the impact strength.
Downloads
References
R. M. Jones, Mechanics of Composite Materials. Virginia, USA: CRC Press, 2021.
F. I. Mahir, K. N. Keya, B. Sarker, K. M. Nahiun, and R. A. Khan, “Review a brief review on natural fiber used as a replacement of synthetic fiber in polymer composites,” Mater. Eng. Res., vol. 1, no. 2, pp. 86–97, 2019, doi: 10.25082/MER.2019.02.007.
R. F. Septiyanto, A. Hanif, and D. Abdullah, “Perbandingan Komposit Serat Alam dan Serat Sintetis melalui Uji Tarik dengan Bahan Serat jute dan e-glass,” GRAVITY J. Ilm. Penelit. dan Pembelajaran Fis., vol. 2, no. 1, pp. 1–4, 2016, doi: 10.30870/gravity.v1i1.2536.
S. Usmiati, N. Nurdjannah, and Sri Yuliani, “Limbah Penyulingan Sereh Wangi Dan Nilam Sebagai Insektisida Pengusir Lalat Rumah (Musca domestica),” J. Tek. Ind. Pert, vol. 15, no. 1, pp. 10–16, 2012.
A. D. Afenanda, teguh D. Widodo, and R. Raharjo, “Pengaruh Perlakuan Larutan NaOH terhadap Kekuatan Tarik Komposit Serat Batang Serai Wangi (Cymbopogon nardus) Bermatriks Epoxy,” Universitas Brawijaya, 2018.
S. Astuti, F. E. Ku. Rastini, and D. H. Praswanto, Biokomposit Bubur Koran sebagai Alternatif Bahan Baku Pembuatan Aksesoris Kerajinan Pengganti Keramik. Malang: Dream Litera Buana, 2019.
S. S. Godara, “ScienceDirect Effect of chemical modification of fiber surface on natural fiber composites : A review,” Mater. Today Proc., vol. 18, no. 7, pp. 3428–3434, 2019.
A. W. Gunandar, “Analisis Kekuatan Tarik Dan Impak Bahan Komposit Hibrid Berpenguat Serbuk Kayu Akasia Dan Tandan Kosong Kelapa Sawit,” Universitas Islam Riau, 2021. [Online]. Available: https://repository.uir.ac.id/8977/%0Ahttps://repository.uir.ac.id/8977/1/153310526.pdf
S. Muriana, “Analisis Komposit Berpenguat Serat Tandan Sawit Terhadap Kekuatan Tarik dan Kekuatan Impak dengan Perendaman Asap Cair,” Politeknik Manufaktur Negeri Bangka Belitung, 2023.
I. Renreng, U. Hasanuddin, and R. Soenoko, “Effect Of Turmeric ( Curcuma ) Solution Treatment Toward The Interfacial Shear Stress And Wettabilty Of A Single Fiber Akaa ( Corypha ) On Epoxy Matrix,” Int. J. Appl. Eng. Res., vol. 10, no. 10, pp. 26379–26390, 2015.
D. Andriani, N. Setyanto, and L. T. W. Kusuma, Desain dan Analisis Eksperimen Untuk Rekayasa Kualitas. Malang: Tim UB Press, 2017.
D. C. Montgomery, Design and Analysis of Experiments, Ninth edit. Tempe, Arizona: John Wiley & Sons, Inc., 2017.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Jurnal Inovasi Teknologi Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
